Erbauer Diamond Tile Drill Bit 8 x 80mm (85345)

£ 20.19INC VAT

Add to basket for...

Erbauer Diamond Tile Drill Bit 8 x 80mm (85345)

Long life, fine diamond grit for a professional quality finish without chipping tiles. Easy to maintain, self-cooling and self-sharpening grit. Suitable for dry and wet cutting.

  • Self-Cooling
  • Self-Sharpening
  • Fast Drilling Speed
  • Use on Full Speed for Best Results & Longer Life
  • No Need for Water
  • Will Drill the Hardest Porcelain Tiles
  • Diamond Grazed Tip
  • Wax Filled Centre

More Info

View all: Erbauer Drill Bits

Bulk Save Save up to 10%
Bulk savings
QTY Price per item Saving
1 - 2 £20.19 -
3 - 4 £19.18 Save 5%
5 + £18.17 Save 10%
£20.19INC VAT

Add to basket for...

Add to saved list...

Rated 5 out of 5 by from That is what you need for tile All what I needed. Do the job. Drilling in tiles is very easy with it.
Date published: 2022-09-02
Rated 5 out of 5 by from Great Drill Bit I have just used one of these to drill 8 (yes, 8) holes in some new porcelain tiles in our shower. And It is still not worn out, though it is certainly getting tired. I have therefore given it a 5 star rating, since everything I found on the internet suggested I would be doing well to get 4 holes out of it. But this is the only drill bit of this type I have used, so I have nothing to compare it against.
Date published: 2022-06-05
Rated 1 out of 5 by from Not good Not unless you have a hole partially drilled in tile you can use this ,otherwise trying to start a hole with this is a nightmare as it has no point but just a flat surface.
Date published: 2022-04-18
Rated 1 out of 5 by from Not suitable for porcelain! Bought to fit our bathroom suit in newly tiled bathroom, porcelain tiles, the bit drilled 4 holes in the floor, when I moved to the wall fixings it was finished, used exactly as instructed, full speed and no need for water, lost a full day of work as I didn’t have an alternative bit, I’ll be returning at my earliest convenience. Very disappointed especially at the price.
Date published: 2022-02-03
  • y_2022, m_9, d_26, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_64
  • loc_en_GB, sid_85345, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 98ms

Could this be used to grind off a small lip on the edge of a mild steel part?

Asked by: Mick1213
Hello Mick1213, No, this is not suitable for use on metal. Thank you for using Q&A
Answered by: Cwalm
Date published: 2021-01-26

Garage roof sheet

I need to drill some holes (4) in my Garage roof which is the newer type asbestos corrugated sheets to add new 'C' clamps to make the end of the roof more secure. is this OK?
Asked by: McGuyver
Hello McGuyver, We are unable to offer any kind of advice in reference to working with asbestos, for obvious safety reasons. We would advise getting in contact with a relevantly qualified professional. Thank you for using Q&A AS
Answered by: ProductSupport1
Date published: 2020-08-03

Can it be used in a normal electrical drill chuck

Asked by: Cayl
Hello Cayl, This this can be used in a standard 13mm chuck. Thank you for using Q&A SW
Answered by: SWake
Date published: 2020-03-30

How do you extract the core out of bit after drilling hole?

Asked by: Gasman82
Hello, There isnt a specific tool or method for this. Depending how compact or hard the material inside the core bit is you can usually remove the sediment by washing or scraping out the centre with a suitably sizes implement. Sometime you can gently tap it out as well. Thanks for using Q&A
Answered by: DGIFF
Date published: 2019-12-17

Porcelain Slabs

Will this be suitable for porcelain garden slabs, 22mm thick? How many holes will they cut before failing approximately?
Asked by: Bails1310
Hello Bails1310, Yes, this should be suitable for a garden slab. There is not an exact number on how many holes this item will be able to cut due to this item being used on a variety of different materials and thicknesses. Thank you for using Q&A TC
Answered by: Tomc1234
Date published: 2019-07-28
  • y_2022, m_9, d_26, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_GB, sid_85345, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 91ms
  • bvseo-msg: BV SEO Content for this product did not include verbose reviews.;
Brand Erbauer
Drill Bit Type Diamond Tile
Manufacturer Guarantee 1 Year Guarantee
Pack Size 1
Pieces in Pack/Case 1
Product Diameter 8 mm
Product Length 80 mm
Product Type Diamond Tile Drill Bit
PTA Shank Type Hex Shank
Suitable Drilling Applications Tile