Will this replace the Danfoss TS715SI as they are both single channel, also what would be done with the current dial thermostat on the wall that currently is used to control the temperature.
Yes this is a replacement, With your existing Room stat you will need to do one of the following.
1. leave the thermostat where it is, and just set it to its highest setting, therefore giving it a permanent open circuit.
2. Remove the thermostat and link the LIVE in to the LIVE out, using a terminal box. Then hiding this in the wall.
3. Trace the wires from the thermostat back to the wiring centre and link the LIVE in and the LIVE out at the wiring centre. Allowing you to strip out all the wiring to the room thermostat.
Answered by: Martin, Technical Support
Date published: 2022-02-02