Off cuts
With the off cut. Is there another method i could use other than solder. Like a clip or something
Asked by: RPL7
Hi There, Yes you can purchase clip on connectors EN-ST100B. Thanks Aurora
Answered by: Aurora Technical
Date published: 2021-02-10
Led dimmable driver for this strip
I have got an led dimmable driver for two of these strips but it’s making a really loud noise. Could you please suggest to me some more suitable led dimmable drivers for this please.
Asked by: lukec398
Hi There, We would recommend LEDD9012 dimmable via 1-10V signal upto 90W.
Thanks Aurora
Answered by: Aurora Technical
Date published: 2021-02-07
At what intervals can this be cut and what plug fuse is required?
I need a strip for an island that is 1800mm. And then i need to spare strip to go under 2 x 600mm wall cabinets.
I will plug the driver into a UK plug so what fuse would be required? Thanks.
Asked by: Mynicknameislessthanfour
Hi There, Cut points every 50mm. You need to purchase a 12V LED Driver to power the strips, so depending on the over all power consumed will depending on the fuse size.Thanks Aurora
Answered by: Aurora Technical
Date published: 2020-12-06