Browse store

Vent-Axia 450873 20W Extractor Fan Wall Fixing Kit 150mm (33014)

Contains: fixings, grille and wall duct.

  • Extraction Rate
  • Noise Level at 3m
  • Wall-Mounted
  • 2 Year Manufacturer's Guarantee (T&Cs Apply)
  • Model No: 450873
  • Width: 98mm

More Info

£22.99INC VAT

Add to basket for...

Vent-Axia 450873 20W Extractor Fan Wall Fixing Kit 150mm is rated 4.0 out of 5 by 3.
  • y_2017, m_8, d_14, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_GB, sid_33014, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix

Add to saved list...

Save
Rated 5 out of 5 by from Good but expensive I bought and installed two of these duct kits within an external metal clad wall. I used a 152mm hole saw but had to do a little bit of filing around the metal hole before the plastic solid duct would fit then I used a wide piece of wood and a mallet to carefully and evenly tap the duct into the hole to achieve a very tight fit and satisfactory fit. Then with the duct in place and flush with the internal wall, I marked around the duct with a pen flush with the outside wall, then pulled the duct out from the wall slightly. I carefully cut around the pen mark then gently tapped the duct back into the wall until it was flush with the external wall. The 150mm solid plastic duct and external grill are both good quality items if a little bit expensive. I would definitely use this product again and recommend it rather than the flexible ducting.
Date published: 2017-07-26
Rated 2 out of 5 by from very tight fit for 152mm hole Bought this to go with a Vent Axia 150mm kitchen fan. Cut a hole with a [brand new]152mm core bit. The sleeve was too tight a fit to get in easily. Managed it, but it was quite an effort. External grille could do with gravity flaps as the backdraft mechanism in the fan failed after only a week. Altogether not v. satisfactory...
Date published: 2017-03-02
Rated 5 out of 5 by from excellent product used instead of a cooker hood - intalled in cupboard above hob. powerful and above all very quiet when compared with conventional hoods. with a 6inch outlet you need plenty of room unless you decide to reduce down to 4inch
Date published: 2012-11-29
  • y_2017, m_8, d_14, h_8
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_GB, sid_33014, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix

What size is the wall duct

Asked by: Jimppy
  • y_2017, m_8, d_14, h_1CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestions, tq_1
  • loc_en_GB, sid_33014, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
Specification
Brand Vent-Axia
Fixings Supplied Fixings Supplied
Installation Type Wall-Mounted
Manufacturer Guarantee 2 Year Manufacturer's Guarantee (T&Cs Apply)
Model No 450873
Mount Type Wall-Mounted
Pack Size 1
Pieces in Pack/Case 1
Power Output (Watts/Kw) 20 W
Product Diameter 150 mm
Product Height 98 mm
Product Type Extractor Fan Wall Fixing Kit 150mm
Product Width 98 mm

20W. . . Hole dia. 152mm. Spigot dia. . Width: 98mm. For use with Extractor Fan: (Code 61795). Fixings Supplied.

Product contents

Fixings, grille and wall duct.