Vent-Axia 100WH W Extractor Fan Wall Fixing Kit 100mm
simple to fit
Simple to fit and effective duct for fan, not fiddly like coil spring versions
10 Apr 2013
Good but a bit pricey!
Bought this kit to fit my 100mm Vent-Axia Fan. A bit pricey, but does a good job. (my fan has a back-draught shutter built in).
I liked the two piece straight sleeved 'pvc' duct which was a good fit on my Vent-Axia Fan, it simply telescoped to required length to suit (e.g. cavity wall).
The external louvred wall plate looks good, but I was disappointed that it only had two diagonal fixing points for mounting. I was fixing to rough pebble-dash render and the two fixings had to be left fairly loose to avoid distorting the mounting plate - so I used silicone to bed the plate against.
Overall item is well made and I would use again, if fitting a similar fan.
31 Oct 2012
Good but pricey.
Easy to fit, especially with telescopic tube means no cutting. I did think it was a bit pricey for what it is.
1 May 2012
Works great with VA100 fans
Useful for fitting VA100 range of Vent Axia fans through a cavity wall. I drilled a 117mm hole with a diamond core drill and the fan kit tube fitted, albeit a bit of a gap which I filled with expanding foam.
The two plastic cylinders fit inside each other so the length can be adjusted without cutting to length which is helpful.
The outer griller looks neat on the outside of the house but it would have been better with 4 fixings instead of 2.
28 Aug 2011