Unibond Ultimate Grab Wall Tile Adhesive Beige 10Ltr
It says on the tub....
...that its only recommended for max 30cmx30cm tiles, so the Screwfix description is incorrect.
I've got bigger tiles (40x25mm), so no option but to see how it goes.
1 tub covered 4 square metres as opposed to claim it covers "up to 8m2" - although I did use it to tape up my joints in the panels behind, but that didn't use that much. It all depends on the size of the comb used.
It was very stiff to work with - i guess that is why it grabs the tiles so well, but its hard work spreading it compared to others that I have used.
21 Dec 2013
Won't hold 12mm marble
Goes on okay. Only covers 2 or 3 sqm with a 6mm notch so works out pricey when doing a large wall. Won't hold 12mm marble wall tiles without slipping - needs to be battened underneath while it goes off (Evo-Stik Large Tile won't hold either). But it sticks okay when set.
18 Nov 2013
Applies ok and does grab well, all the other features hopefully will be as stated, ie waterproof etc., only time will tell. One major complaint - a more honest approach to the coverage is required. The application tool notch size will govern the coverage so if you are putting up large tiles, say 300x300 and using a 8mm notched trowel then you will only get just over 2 sq mtr coverage per tub. I would find a simple table most helpful - showing average coverage for various trowel notch sizes.
This may save the user wasteful trips to and fro to buy more adhesive. Check out the stock levels before going to the store, I wiped out both Yeovil's branches, 6 tubs in total, so had to buy another five online to complete the job
10 Apr 2013