Browse store

Triton Kaho Exposed Riser Rail Manual Mixer Shower Flexible Chrome (39122)

Simple and easy to use with a single lever for temperature and power settings. This great value mixer shower comprises of 150mm pipe inlet connections and is suitable for both high and low pressure water systems.

  • Single-Spray Pattern Shower Head
  • 5 Year Manufacturer's Guarantee (T&Cs Apply)
  • Delivers 4.9Ltr/min at 0.1bar
  • Sequential
  • Exposed Valve
  • Manual Temperature Control
  • Single lever
  • Suitable for All Plumbing Systems
  • Anti-Kink Chrome Hose
  • Single Control for Flow and Temperature

More Info

£79.99INC VAT
Was £89.99 Save £10.00 (11%)

Add to basket for...

Triton Kaho Exposed Riser Rail Manual Mixer Shower Flexible Chrome is rated 4.1 out of 5 by 17.
  • y_2017, m_6, d_23, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_17
  • loc_en_GB, sid_39122, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix

Add to saved list...

Save
Rated 2 out of 5 by from Lamentable flow from low head I replaced our 30?+ year old Mira 88 with this unit because the Mira became gradually stiff and drippy, while still providing a fairly impressive flow. We chose the Kaho based on reviews here, makers description, our wish for a simple one lever type, and the fact it just about fitted on the existing pipework. Big, big mistake. The Kaho provides HALF the flow, if that, using the exact same supply, hose, and head. (the supplied Triton hose and head were slightly worse) . Conclusion: fish the good old 88 out of the bin, refurbish and refit. Put the 90 quid waster on the Kaho down to experience!
Date published: 2017-06-06
Rated 5 out of 5 by from Good product Value for money , fitted it instead of Mira 88,cheaper than buying new parts
Date published: 2016-07-01
Rated 5 out of 5 by from Simple/ effective mixer shower Just bought this shower to replace a more expensive shower which never gave a good flow. I wish I had bought this shower to begin with and saved over 400 pounds. Simple,easy to fit and gives a shower with a good flow.
Date published: 2016-06-29
Rated 1 out of 5 by from Useless I purchased this to replace an old gravity fed Mira 8 as it would easily fit my exisiting pipework and it had a higher flow rating than some of the other showers. I had a resonable flow from my Mira 8 but the Triton Kaho barely has enough flow to wash my hair and a shower is impossible. I do not recommend this product and it has been a complete waste of money.
Date published: 2015-12-08
  • y_2017, m_6, d_23, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_17
  • loc_en_GB, sid_39122, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix

To replace Mira 88 exposed back fed from brick

The Kaho needs 30mm pipe projection but the 88 only needed 13mm. Otherwise the centres and connections are same. Is there any clever way round this. What about embedding the Kaho valve 17mm into the wall?
Asked by: Brahan
Thank you for your recent enquiry. I believe we have already spoken to address this question by telephone earlier today. To confirm providing that we can secure the fitting plate, which will effectively be recessed further into the wall rather than on the finished wall surface, then this would over come the spacing issue. You would of course need sufficient space to deal with tightening of the fitting nuts and also the unit will need to be sealed to prevent any water ingress into the wall. Technically, whilst this would overcome the problem it would create service issues relating to the warranty. Best Regards, Karl.
Answered by: Anonymous
Date published: 2017-05-31

Can you attach this to the wall so as to run exposed chrome supply pipes down front of the shower wall. Swirl valve seems to have this.

Asked by: JobberBen
Thank you for your recent enquiry. The inlet elbows will rotate to allow pipework to be falling or rising. I hope that this information is of help. Best Regards, Karl.
Answered by: Anonymous
Date published: 2017-04-29

Can you tell me the distance between the mounting screws.

I am swopping a Spectre Universal exposed mixer and I have existing holes in the tiling at 58mm centres. I see that your mount has slots so I'm hoping I can use it with my existing holes. Thanks.
Asked by: Medicalengineer
Thank you for your recent enquiry. If you would like to contact Triton Customer Service they should be able to supply a template of the fixing brkt for you. Best Regards, Karl.
Answered by: Anonymous
Date published: 2017-01-29

Triton Kaho shower valve

Will this non-thermostatic mixer valve fit easily to replace a Triton Brillio thermostatic bar mixer valve onto existing water outlet pipes? Will it provide a very good flow from the shower head from a low pressure gravity fed system?
Asked by: EMAB
Thank you for your recent enquiry. The fittings of the Kaho will differ to that of a bar mixer (in particular the BRILLIO). As an easier replacement to keep the fittings more matched a bar mixer would be a closer option for you. NOTE : The squared style Bar Mixer Valves are the exception as these will have a slightly different inlet fitting. I hope that this information is of help.
Answered by: Anonymous
Date published: 2017-06-01
  • y_2017, m_6, d_23, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_GB, sid_39122, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
Specification
Brand Triton
Colour Chrome
Control Type Single lever
Flow Rate (Ltr/Min) 4.9 Ltr/min
Manufacturer Guarantee 5 Year Manufacturer's Guarantee (T&Cs Apply)
Maximum Bar Pressure 10.0 bar
Minimum Bar Pressure 0.1 bar
Model Name Kaho
Model No SFXKAHMEXSM
No. of Spray Patterns Single-Spray Pattern
Pack Size 1
Pieces in Pack/Case 1
Pipe Centres Size/Range 150 mm
Product Depth 130 mm
Product Height 100 mm
Product Type Manual Mixer Shower Flexible
Product Width 150 mm
Temperature Control Type Manual Temperature Control
Total Product Weight 3 kg
Valve Type Exposed

Pipe centres: 150mm. Operating water pressure: 0.1-10.0bar. No Water Failure Shutdown. Weight: 3kg. Model: SFXKAHMEXSM.

Product contents

Manual mixer valve, riser rail, showerhead and holder, hose and fixings.

Downloads

Instruction Manual