Rated 5 out of 5Â by Gus9 Good Value.
Low cost replacement witha dual flush facility. Was originally bought asa temporary,quick fix solution. So impressed, will keep for some time.
22 Oct 2011
Rated 5 out of 5Â by BigShawnwolfie well easy to fit
I've never fitted a complete toilet system before I'm just a DIY'er leaking pipes and tap washers sinks etc, I read the instructions then fitted it the internal's in the top of the system with plenty of NN silicone bolted up till rubbers were quite squashed left it to dry while I took out old loo, bolted top to bottom bit of grease around the waste end and it slid straight into waste pipe at the rear of the loo, screwed base of loo with round rubber and steel washers 4 inch x 8 mm screws till firm then top of the system with more rubber and steel washers 3 inch x 6 mm into the wall till firm, For my first time it was so easy and the price I paid they are well worth the money, I would def recommend this product.
8 Sep 2014
Rated 3 out of 5Â by MoneySaver Excellent value for money
Nicely made toilet with reasonably clear instructions for assembly (though there are two sets of instructions for the fill mechanism which contradict each other). Stickers on the product are annoyingly cheap meaning that they can't be easily peeled off and will require soaking to remove them. Also this loo is replacing a low level toilet and this means that the waste is some distance from the loo - this meant that it couldn't be mounted to the wall because it would cover the waste - it would be good to have a recess in the base to allow for this. Really cheap and nasty toilet seat but still, for the price, pretty good overall.
5 Aug 2014
Rated 4 out of 5Â by Mistook Good product, some reservation
This toilet is all that you need and I, a definite amateur, managed to install it with only a couple of hiccups.
Firstly the list of parts supplied, item J shows 2 washers. BUT the instructions ref 2 and 5 call for 2 x 2, ie 4 washers! I omitted the ones on the outside of the cistern and hope that is correct.
Second, maybe related to the above, I had trouble getting a watertight seal on one of the bolts. After three attempts at tightening (being concerned not to over tighten as per instructions) I resorted to using vaseline under the washer to seal the joint. This seems to have worked.
Overall I am pleased and my moans are mostly to draw attention to the instruction errors.
1 Aug 2014