0500 41 41 41
Cookie Reports - Screwfix Cookie Policy


Titan Flush Trim Bit With Bearing ¼" Shank 12.7 x 25mm

Product Code: 63434

For trimming hard laminates such as kitchen worktops. Glue must be dry to prevent fouling of bearing.

Shank size ¼". Cutting diameter 12.7mm. Cutting length 25mm.


2.2 5 5

Was £7.99

Save £4.00 (50%)

Add for Delivery

Add to saved list

Not available for deliveryOut of Stock for Delivery
Available for collection from store Store Collection Check stock in your store
Page 1 of 4
Page 1 of 4
Titan Flush Trim Bit With Bearing ¼" Shank 12.7 x 25mm 2.2 5 5 5
below average bit the router bit itself is of pretty good quality....but as for the bearing wheel it came apart within minutes of using it...very poor build indeed...had a spare wheel to finish off the job .....will be more careful in future but like i said cutter is fine.. 17 Jul 2014
I've not had a problem I've not had a problem with mine, I'm about to order another as a back up. My current one now has a very small nick in it due to routing through a screw, not that you can notice on the MDF I've been using it on. I've got several of the Titan ones and although I'd say they are not as hard wearing as much more expensive ones they are accurate and so cheep that I don't mind too much if I trash one through my incompetence! 27 Nov 2013
Same as the other reviews The bearing came off mine twice too, ruining the work pieces. Next time I'm going for something more expensive. 28 Aug 2013
Poor, really poor. I wish I'd read the previous review before buying this bit. The bearing flew off and wrecked my work. I got a refund for the bit and upgraded to a decent one. It cost me another £40 to replace the damaged marine ply though. 8 Feb 2012
Page : 2 next>


Brand Titan
Cutting Diameter 12.7 mm
Cutting Length Capacity 25 mm
Pack Size 1
Product Diameter 12.7 mm
Product Length 25 mm
Product Type Flush Trim Bit with Bearing
Shank Size ¼ "
Total Product Weight 0.0 kg