Rated 5 out of 5Â by jgb664 worth the cost
Got these screws a number of years ago for my decking. When relaying it this year, these screws are just like new. They went in shiney and sharp and they came out shiney and sharp. Ive reused them and bought some more for the additional work ive got to do. Cross head is good and strong, doesnt round off if you use the correct bit. Although it suggests pre drilling the pilot hole, i just screw straight through the decking without any issue's .
13 May 2016
Rated 2 out of 5Â by DevLondon Too fragile and inconsistent
Good value for Stainless Steel, but:
* Quality control is poor - I found several screws with bent shanks
* I know SS is soft - but these are very fragile. I only had a 3mm bit to hand for the pilot holes but was using very soft wood (cedar). About 10% of the screws broke off at the head.
* If you use these - then drill a full length 3.5mm pilot hole, Make sure you drive them straight and never try to re-use a screw that you have just unscrewed. They break about twice as often if you try to tighten them twice.
Would not buy again.
29 Apr 2016
Rated 5 out of 5Â by BertieH Stainless steel screws
Used these to fix roofing battens on summerhouse. They were very easy to drive in, and although I drilled pilot holes, they would probably have gone into the joists without doing so. None of the heads distorted in using up nearly 2 boxes off them. Would certainly recommend them.
24 Sep 2015
Rated 5 out of 5Â by Kringo Just the job
Used to fix Siberian Larch feather edge boards. Easy to drive and good value.
23 Jun 2015