Water Pressure Unvented system
We are installing an unvented heating system, pressure should be at least 2.4 bar, will this be sufficient for this faucet ?
Unfortunately Screwfix is unable to offer installation or usage advice other than that contained in the manufacturer’s instructions.
We would also recommend contacting a suitably qualified tradesperson for advice.
As far as we are aware, this shower will be suitable for use with a water pressure of 2.4 bar.
Thank you for using Q&A. PB
Date published: 2017-02-22
have you got domensions of pipe centers(hot and cold feed)
The pipe centers on mine are 175mm.
Hello joinerray22,the pipe centres 150mm on this product Thank you for using Q and A
Date published: 2016-09-19
Specs - Which One
In your description is says min of 0.2 bar on the instructions it says 0.5 bar. I guess the instructions are what we should look at.
Also does anyone know what a normal house pressure should be?
Please follow the 0.5 minimum pressure as stated in the instruction manual and disregard the 0.2
Thank you for using Q and A.
Date published: 2016-04-28