Rated 4 out of 5
Â by PapaJimmy Good solid fixings
Good fixings, but you have to take your time, and as other reviewers have said drill the fixing first so that it operates freely. you might break some, but better broken in your grips than in the plasterboard. prepare the fixings, gently position into the plasterboard, screw it tight, screw the job onto the wall, you'll feel the resistance change as the toggle slides up and engages. great idea, shame about the wasted ones and the 100 item box. 4/5,
1 Sep 2015
Rated 5 out of 5Â by Metalhed666 Brilliant plasterboard fixings
I used 35mm screw-in fixings to hold a floor-standing shelf unit against a plasterboard wall and the shelf ripped them straight out immediately; I put Driva Plus fixings in the same holes and they are absolutely rock solid.
You do have to pre-screw them first to stop them failing to deploy as the silver coating glues them shut - grip it in grips and power drive a screw into it until the mechanism loosens and then withdraw the screw - which is the only reason I haven't given them 5 stars across the board. Highly recommended.
25 May 2015
Rated 3 out of 5Â by BurridgeDave Very Good
Used these to fit a large heavy mirror to a plasterboard stud wall.
Would advise that you pre-screw before fitting into the plasterboard. I also pilot drilled the wall to check there was no obstruction behind plasterboard
Don't over-tighten in plasterboard.
Good strong fixing.
2 Jan 2015
Rated 5 out of 5Â by dookeymon1 heavy duty fixings
Was doubtful after reading previous reviews, but decided to use these for refitting a Hair Salon where heavy mirrors and fittings needed attaching to plasterboard walls (including insulated board), They performed perfectly, i have now fitted all 100 (using cordless drill) and only had one failure where the toggle didn't deploy, this i believe was due to fitting the screw too fast, if you take your time you can hear/feel the toggle deploy, These are the best fixings, will be getting another box soon
25 Nov 2014