Spit Driva Plus Cavity Fixings Metal 39mm Pack of 100
Used these to fit a large heavy mirror to a plasterboard stud wall.
Would advise that you pre-screw before fitting into the plasterboard. I also pilot drilled the wall to check there was no obstruction behind plasterboard
Don't over-tighten in plasterboard.
Good strong fixing.
2 Jan 2015
heavy duty fixings
Was doubtful after reading previous reviews, but decided to use these for refitting a Hair Salon where heavy mirrors and fittings needed attaching to plasterboard walls (including insulated board), They performed perfectly, i have now fitted all 100 (using cordless drill) and only had one failure where the toggle didn't deploy, this i believe was due to fitting the screw too fast, if you take your time you can hear/feel the toggle deploy, These are the best fixings, will be getting another box soon
25 Nov 2014
weak dear plasterboard fixings
usable if you pre-drive the screw beforehand & then remove, of the dozen or so l have used so far two broke if they were just driven into the plasterboard & then the securing screw was used. once secured, they offer more security than just the ordinary screw in type.
5 Jul 2014
good but expect to break a few
Used these in the past for kitchen wall cabinets. They are strong like normal redidrivas, but with the added advanatage of the clamp toggle at the back, which actually works !!
Thee problem with them is that many of the clamp toggles at the back fall off when you insert the screw and tighten it (you can hear them fall off). Out of a pack of 100 i'd say expect 20 or 30 to do this.
I found that loosening the toggle before you put them in helps a bit.
Unfortunately, they are only available in packs of 100, which is insane. Should they be available in packs of 10 or 20 then i'm sure more people would buy them. But lets face it how often do you need 100?
18 Apr 2014