Browse store

Spit Driva Plus Cavity Fixings Metal 39mm 100 Pack (31546)

Quick and easy to install, self-drilling plasterboard fixings for heavier loads. The hinged toggle provides a secure clamp-fix on the plasterboard while the head sits flush behind the fixture. Can be removed and re-used.

More Info

Bulk Save Save up to 10%

QTY Price per item Saving
1 - 4 £37.99 -
5 + £34.19 Save 10%
£37.99INC VAT

Add to basket for...

Not available for delivery
Spit Driva Plus Cavity Fixings Metal 39mm 100 Pack is rated 4.0 out of 5 by 6.
  • y_2017, m_5, d_25, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_GB, sid_31546, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix

Add to saved list...

Save
Rated 4 out of 5 by from Good solid fixings Good fixings, but you have to take your time, and as other reviewers have said drill the fixing first so that it operates freely. you might break some, but better broken in your grips than in the plasterboard. prepare the fixings, gently position into the plasterboard, screw it tight, screw the job onto the wall, you'll feel the resistance change as the toggle slides up and engages. great idea, shame about the wasted ones and the 100 item box. 4/5,
Date published: 2015-09-01
Rated 5 out of 5 by from Brilliant plasterboard fixings I used 35mm screw-in fixings to hold a floor-standing shelf unit against a plasterboard wall and the shelf ripped them straight out immediately; I put Driva Plus fixings in the same holes and they are absolutely rock solid. You do have to pre-screw them first to stop them failing to deploy as the silver coating glues them shut - grip it in grips and power drive a screw into it until the mechanism loosens and then withdraw the screw - which is the only reason I haven't given them 5 stars across the board. Highly recommended.
Date published: 2015-05-25
Rated 3 out of 5 by from Very Good Used these to fit a large heavy mirror to a plasterboard stud wall. Would advise that you pre-screw before fitting into the plasterboard. I also pilot drilled the wall to check there was no obstruction behind plasterboard Don't over-tighten in plasterboard. Good strong fixing.
Date published: 2015-01-02
Rated 5 out of 5 by from heavy duty fixings Was doubtful after reading previous reviews, but decided to use these for refitting a Hair Salon where heavy mirrors and fittings needed attaching to plasterboard walls (including insulated board), They performed perfectly, i have now fitted all 100 (using cordless drill) and only had one failure where the toggle didn't deploy, this i believe was due to fitting the screw too fast, if you take your time you can hear/feel the toggle deploy, These are the best fixings, will be getting another box soon
Date published: 2014-11-25
  • y_2017, m_5, d_25, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_GB, sid_31546, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix

Hi, what is the minimum fixture thickness with the screws that are supplied? What size are the screws?

Asked by: Phil75
Hi Phil75, thank you for your question. The screws that are supplied with the Driva Plus are 45mm in length. The maximum fixture thickness is 12mm and there is no minimum fixture thickness. The minimum thickness of plasterboard that the Driva plus should be used in is 10mm. As with all fixings please ensure the base material and fixings are suitable for the application. Kind regards ITW.
Answered by: ITW Spit
Date published: 2017-05-06

What depth gap is required behind plasterboard to allow toggle to deploy?

Asked by: DaveJH
Hi Dave JH, thank you for your question. To ensure that the toggle on the Driva Plus is able to fully deploy, a clearance of 10mm is required around the fixing. Kind regards ITW.
Answered by: ITW Spit
Date published: 2017-02-17

We've recently had our walls insulated with 50mm insulation blocks, and then 12 mm plasterboard put over it and re-plastered. We need to know if these fixings can be used to hang kitchen wall cupboards and take the weight of contents too?

Asked by: Deano1006
Hi Deano1006, thank you for your question. The Spit Driva Plus can be used for this application, under the following conditions; the recommended loading of 0.18Kn per fixings, based in standard 12.5mm plasterboard, is not exceed, the maximum fixture thickness of 12mm is not exceed and there is sufficient cavity behind the plasterboard to ensure the fixing fully engages. Kind regards ITW.
Answered by: ITW Spit
Date published: 2016-12-18

Plasterboard thickness

What is the maximum and minimum platerboard thickness recommended for this product ? Thanks
Asked by: Fixer24
Hi Fixer24, thank you for your question. The Driva Plus is designed for plasterboard with a thickness from 10mm to 13mm. The maximum fixture thickness that can be secured is 12mm. Kind regards ITW
Answered by: ITW Spit
Date published: 2016-12-18
  • y_2017, m_5, d_25, h_13CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_GB, sid_31546, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
Specification
Brand Spit
Construction Material (Fixings) Metal
Manufacturer Guarantee 1 Year Guarantee
Pack Size 100
Pieces in Pack/Case 100
Product Length 39 mm
Product Type Driva Plus Cavity Fixings

Max. fixture thickness: 12mm. Plasterboard thickness 10-13mm. Anchor body is Zamak 3 zinc alloy construction.