Rated 5 out of 5Â by focusecoboost TV Wall Mount
Great bit of kit! All you need is a 10mm masonry drill bit, a 13mm socket and a posi drive screw driver because all the fixtures are included with the TV wall bracket.
Attach the wall plate to the wall, using the two supplied bolts. Screw the two arms onto the back of the TV with the supplied screws (there are different size screws, M4, M5 & M6 and different length screws just in case you want to add the supplied spacers), then just hook the TV onto the wall plate - job done.
I used the spaces as the aerial is flush on the back of the TV and I didn't have an angled connector. When I get one I will remove the spacers, then the TV will sit flush against the wall. Put the aerial/leads into the TV before putting onto the wall!
I used the bracket to put my 42" TV onto the wall, I know the bracket says 22" - 37" but it supports vesa 200 x 200 and the TV is way less than the maximum 22kg
19 Nov 2015
Rated 4 out of 5Â by Chuck2808 Excellent product - but beware
This is an excellent product - very well made and does the job.
NOTE HOWEVER: I bought this bracket to fit a 32" Samsung TV. VESA size 200 x 200.
The bracket comes with screws in 3 different sizes (M4, M5 and M6) - but the Samsung requires M8 screws.
Thankfully the holes in the bracket can accommodate M8 screws so I have had to buy 4 M8 x 25 Screws.
16 Jul 2015
Rated 3 out of 5Â by Youknowthis Samsung warning
This is a good product but I've had the same experience as another reviewer. This does not come with fixing bolts for a Samsung 32" TV. Luckily screwfix do some m8 bolts which did the job but it is extra cost.
13 Jun 2015
Rated 1 out of 5Â by PokerMan 22" - 37"
Bought this for a Sanyo 37" tv and it is way too small.
Not suitable at all.. check tv fixings before buying.
15 May 2015