Rated 5 out of
Oscillating Spindle Sander
Very easy to set up and excellent storage for ancillary parts built into machine. Great sander for those jobs that need an excellent finish on your project / job.
Date published: 2016-09-14
Rated 5 out of
Works as expected
Only just got it, and used it on a quick project.... Quick and easy to change spindles. Sands as expected, suitable amount of spindles for various curves.. Highly recommend....
Date published: 2016-04-27
Rated 4 out of
Seems like a good machine
I can only give limited rating as i have just got the machine.So far the machine is of a good build quality and performs well (in short the time i have had it).Delivery was quick,set up easy.The only thing is the user manual has an exploded parts view but no metion of the parts also no mention of the carbon brushes.
Date published: 2015-11-03
Rated 4 out of
well made machine
well packaged, reasonably quiet, all considered, and all the 'bits' stored on the machine. Brilliant! All the sanding bobbins are 80 grit so don't expect a fine finish. I used them on white oak and although they cut well the finish required some finer hand sanding, but still a very useful machine Only two quibbles, 1. the table does not tilt and 2. Screwfix do not sell replacement sanding bobbins #of any grit# but then again I have found that with a few things I've purchased from them. They don't sell consumables for some of their products. Missing a trick there! However I highly recommend this machine.
Date published: 2015-09-24
Length of sanding sleeves
I do understand that the sanding sleeves come in standard sizes, with the diameters already been listed.
But what is the length of the sleeves?
I have so far found 3 different lengths of sanding sleeves
and can't figure out which of the three is the standard length..
The length of the sleeve is 115mm
Date published: 2016-06-18
Is it possible to renew the sandpaper on the bobbin sleeves ? Or do I have to bu a new sleeve when it is worn ?
I only need one diameter of sleeve with a coarse grit - is it possible to buy a pack of these or do I have to but the full pack of different sizes each time ?
Hello Please contact your local screw fix store who will be able to help you .
Date published: 2016-10-15
how easy is it to purchase spare sanding sleeves for the sanding bobbin
Hello The sanding sleeves are standard sizes available in sets of three various grits .
Date published: 2016-02-03
|Carry Case/Bag Included
|Corded or Cordless
||1 Year Guarantee
|No Load Speed
||Thermal Overload Protection
|Pieces in Pack/Case
|Power Output (Watts/Kw)
|Power Voltage Supply
|Total Product Weight
Oscillation stroke: 16mm. W x D x H: 365 x 440 x 400mm. No. load speed: 2000rpm. Weight: 14.6kg. Sanding surface: 76mm. Belt W x L: 13-76 x 115mm. Table W x L: 370 x 290mm. Spindle speed 2000rpm. Includes Plug.
OSM100, 6 x sanding sleeves (13, 19, 26, 38, 51 and 76mm), 6 x table inserts (13, 19, 26, 38, 51 and 76mm).
*Delivered direct from our suppliers in the number of working days stated on the delivery button