Browse store

Sabrefix Heavy Duty Angle Brackets Galvanised 60 x 50mm 10 Pack (61576)

2mm thick. Can be secured with nails, screws or bolts.

  • Can be secured with nails, screws or bolts
  • Model No:

More Info

£6.99INC VAT

Add to basket for...

Rated 4.6 out of 5 by 34 reviewers.
  • 2016-09-28 T06:00:58.882-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_34, tr_34
  • loc_en_US, sid_61576, prod, sort_default

Add to saved list...

Save
Rated 5 out of 5 by Strong and solid brackets Good quality and strong brackets. Useful middle big hole if you need to fix it to the wall without a need to drill a bigger hole for the plug. 30 Aug 2016
Rated 1 out of 5 by Not square! All the brackets in the pack were about 3 degrees off 90. I did not have a vice or time to get them square. Wasted my time as I had to go back and change for better quality. Got prouct code 71671 backets, and these did the job perfectly. 21 Aug 2016
Rated 5 out of 5 by Great brackets I found these brackets on Screwfix as I needed something strong enough to hold up a couple of substantial pelmets. They proved to be totally up to the job and I needed less brackets than I thought due to their strength. There was no flex in the bracket when loaded and they are doing the required job perfectly. There are plenty of fixing holes in both parts of the bracket, so no fixing problems at all. Overall, if you want a strong bracket these are perfect for you. 8 Aug 2016
Rated 1 out of 5 by 2013 Excellent, 2016 Rubbish Bought a pack of these in 2013 and have just used them to hang some big cupboards on the wall. The 2013 batch were all identical, perfect 90 degree bends and each side was an exact match for the next one so I could confidently mark out with one and all would fit the same. The small holes are 5mm and by coincidence matched the holes in the cupboards, so I used euro screws. The finished job was perfect, so I thought I would have some more of these. Bought another pack and found they were not identical, not a perfect 90 degrees, not perfectly symmetrical, so would be problem to use for cabinet work. Took them back and got a refund. Disappointing. 4 Aug 2016
  • 2016-09-28 T06:00:58.882-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_34, tr_34
  • loc_en_US, sid_61576, prod, sort_default
Page : 2 next>
1 Question  1 Answer

Screwfix Q&A

Ask your questions. Share your answers.

 
 
« Back
 
 
Search:
Need to know what size fixings to choose.
16 Dec 2015
Customer avatar
by
Lincoln
Read all my Q&A
, DIY
+4points
9out of 14found this question helpful.
Was this helpful?Yes9No5

Answers

Answer: 
Measured with a digital calliper the central holes are 11mm and the other holes 5mm.

So ideally you would use a 10mm bolt and 4mm screws. I've used left over 8mm bolts fine though as the washer covers the hole.
29 Apr 2016
Customer avatar
by
Worksop
Read all my Q&A
, Other Trade
+21points
21of 21found this answer helpful.
Was this helpful?Yes21No0
1 of 1
  • 2016-09-28 T05:59:29.822-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_61576, prod, sort_default
1 of 1
Specification
Brand Sabrefix
Colour Galvanised
Finish Galvanised
Manufacturer Guarantee 1 Year Manufacturer's Guarantee
Pack Size 10
Pieces in Pack/Case 10
Pieces in Pack/Case 10
Product Depth 50 mm
Product Height 50 mm
Product Length 60 mm
Product Thickness 2 mm
Product Type Heavy Duty Angle Brackets
Product Width 60 mm
Total Product Weight 0.08 kg

EN 10142.