Rotary Coaxial Cable Stripper
Always struggled with using pliers and Stanley blade thought give this a go and it did the job fine
28 May 2015
useful but could be better
Like one of the other reviewers, I find it leaves too much of the core insulation. Or rather if used as instructed the conductor is not long enough to connect in the f connector socket and the core insulation is so long it prevents the connector being fitted correctly. Yes the user will think of an easy work around to cope (as did the one reviewer) but it should have been designed correctly in the first place, especially at the price.
Despite the above, it is still better than a knife.
On the plus side easy to adjust the blades to suit the cable you are using.
12 Dec 2013
Round and round we go
A great little time saver. Works well but can tend to clog with cable sheath off cuts but easy to clear.
11 Jan 2013
Does the job, Not bad
Got fedup of using a stanley knife , as I started doing more coax, I would say for a fairly new user of these type of strippers , its not too bad however I have seen better. The main problem I would say is that it leaves a little too much length on the insulation of the core, you just have to flip it around and strip it back a little more , so theres 2 lot of actions instead of 1.
overall a good bit of kit and saves time and a fairly clean strip , blades depths can be adjusted
26 Oct 2012