Hi - wired this up to replace a pull corde light switch (as mentioned by others) with Lout and N but it didn't work. (There are only 2 real wires - black and red) Is the device faulty - what am I missing ?
I've also adjusted the settings from max to min on all parameters.
You are missing a neutral. All you have there is a permanent live and a switched live.
Date published: 2017-03-12
BYPASS BATHROOM PULL CORD?
Is this fixed BETWEEN the pull cord & the unit or INSTED of the PULL CORD?
I.E: Pull cord - unit then light or REPLACE PULL CORD then have UNIT then light.
How do I know which is the LIVE IN & which is the LIVE OUT on my PULL CORD?
Are you sure you asked a question about the right product?
Date published: 2017-02-24
How to connect to Cable wih Live, Neutral & Earth wires
I have a drawstring ceiling switch which has cable from light with Live, Neutral & Earth wires only.
The sensor switch has a Live In, Live Out & Neutral.
Can I connect the Live to Live Out and Neutral to Neutral, or how do I connect this if possible with current wiring?
This is for a downstairs toilet, but would also like to install in bathroom if I can get this to work.
Here is a link to the installation document
Date published: 2016-12-21