Rated 3 out of
Made in England
Not fitted yet but opened up to ensure all components were there, which they were. To be honest I don't have much luck buying British made products and I'm concerned about the quality of the item as the first thing I noticed was the outlet connector producing from the top at a strange angle, not perpendicular to the top of the tank. Lucky I own a pipe bender.
Date published: 2016-09-18
Rated 5 out of
Easy to fit, great insulation!
Bought 2 of these for hostel on Isle Of Skye for running Ladies and Gents showers,
easy to fit with most fitting in the box.
Had it running of a 250L cold water storage tank through a 3.6bar pump to a TMV and then onto push button shower.
Switched on heating elements, 2 hours later hot water you could shower from, switched off after test, nine hours later still hot water for showers.
Date published: 2016-02-11
Rated 5 out of
More than you think
Doe's exactly what it says on the tin and more. The kit comes with an expansion vessel, two safety valves, filter and is preloaded with heating
elements and stats. Plus all connections are 22mm (simples)
Date published: 2015-11-22
What items does this kit come with? I see you have mentioned an expansion tank in a previous question. How about a pressure relief valve, tundish or balancing valve?
Cylinder fitted with:
2 x 3 kw Immersion Heaters
1 x Temperature & Pressure Relief Valve
Inlet Control Set (Comprising 3 bar Reducing Valve & 6 Bar Relief Valve)
Fixings (Nuts & Olives)
18L Expansion Vessel
Date published: 2017-03-26
Is this 2 x 3kw immersion heater and what is the efficiency rating?
Yes that is correct.
The heat loss factor is 1.8kw per 24 hours
Date published: 2017-01-29
Expansion Vessel requirements
Is there a need to use an expansion vessel? Or is this just optional?
The cylinder does come with a 18L potable expansion vessel, this has to be fitted,
The cylinder must be installed by a G3 qualified engineer
Date published: 2016-09-10
||High Value Insulation
||25 Year Manufacturer's Guarantee (T&Cs Apply)
|Pieces in Pack/Case
Tested to 15bar.
Unvented hot water cylinder and unvented kit.
*Delivered direct from our suppliers in the number of working days stated on the delivery button