Rated 5 out of
Good qauality and output
Easy to fit great quality with a higher heat output than expected , also supplied with all the wall fittings
Date published: 2016-12-04
Rated 5 out of
Just the radiator I needed.
Pleased with the look and quality of the 1800 x 295. Needed a narrow radiator with high output. Would recommend.
Date published: 2016-09-24
Rated 5 out of
Prompt delivery direct from supplier. Bought by us to have fitted by plumber during some renovations. The plumber was impressed with quality and ease of fitting. Output is very good and nearly double that of its nearest equivalent. Looks great up. Extremely happy with this.
Date published: 2015-09-24
Rated 3 out of
Great heat output and smart looking from the front but not as nice looking from the sides and the top as a double panel radiator from the same range (which I purchased earlier).
The description is misleading when it states 'max depth 104mm depending on use of brackets' as there is only one way of using the brackets supplied.
As this single panel radiator is supplied with the same brackets as the double panel versions it sticks out from the wall the same amount as the double panel ones leaving a large gap at the back. If the single panel model was supplied with smaller brackets it would be perfect.
Overall it is still an attractive and efficient radiator.
Date published: 2015-08-27
what thermostatic valves are required for this radiator, straight or angled?
You would require angled valves for this radiator.
Date published: 2016-09-17
Are you sure that 7952 Btu is the correct output?
The Reina website has that for the wider (472mm) model. For this model, it says 6,958 DTU (Delta T50C)
What is the thicknes of the steel tubes please.
Just wanted to ask whether the depth stated (103mm) is the total depth after installation including brackets or if it just the depth of the unit and brackets are additional. If brackets/mounts are additional, what extra depth will be added to the unit?
I can confirm that the 103mm stated is the total depth after installation including the wall brackets.
Date published: 2016-08-09
can this be used horizontally
This item can be mounted horizontally, however, you will be required to request that horizontal mounting brackets be sent with the item at the time of ordering the product as these do not come as standard with this product.
Date published: 2015-11-22
Are you able to install this radiator with pipe work coming from the floor or is it only connected with the pipes in the wall?
Are the output figures (2331w) measured at 50 Δt? or 60 Δt?
At the bottom of the specification table it says "Heat output calculated at Delta_T50K." but 2331W is the heat output of the 472mm wide model, according to Reina's website. It says that this model is 2040W
Date published: 2017-01-24
Hi , is it possible to pick up some brackets for this radiator , the double one
The brackets I had for this radiator have been mislaid.
|Construction Material (Plumbing)
|Height x Width
||550 x 1003
||5 Year Manufacturer's Guarantee (T&Cs Apply)
|Pieces in Pack/Case
|Power Output (Watts/Kw)
|Radiator Height Band
|Radiator Width Band
||Suitable for Hot Water Central Heating Systems
|Total Product Weight
Depth (max.): 103mm (depending on use of brackets). Wall to centre (max.): 65mm (depending on use of brackets). Pressure tested to 15bar. Max. working pressure 10bar. Heat output calculated at Delta_T50K. EN 442.
Radiator, brackets, wall fixings, plug and vent.
*Delivered direct from our suppliers in the number of working days stated on the delivery button