Browse store

Redring Undersink Stored Water Heater 6Ltr 1.5kW (5314P)

Unfortunately this product cannot be delivered offshore.

Compact stored water heater, an efficient way to add a hot water supply where a connection to a central supply is either not possible or practical. Perfect for supplying a sink or basin with hot water set between 22°C and 75°C in kitchens, extensions, loft / room conversions or annexes. Quietly and efficiently heats 6Ltr of cold water at 8°C up to 75°C in just 15 minutes, providing hot water for a variety of uses. Compact size for unobtrusive wall-mounting or floor installation in a cupboard. Easy installation requires a mains cold water feed (max. 8bar pressure) and a 13A plug socket. Heating indicator light and front-mounted thermostat control to select required water temperature. Stainless steel tank with high efficiency "blue diamond" enamel glass lining to prevent corrosion. Accepts 15mm compression or push-fit connections. IPX4 splash-rated for bathroom use. Supplied with di-electric connectors, push-fit adapter and pressure relief valve.

  • Stainless Steel Tank with Enamel Glass Lining
  • Front Thermostat Control
  • Adjustable Maximum Temperature Setting
  • Overheat Protection
  • Wall-Mounted or Freestanding
  • Easy Installation
  • Compact Size
  • 1 Year Guarantee
  • Stainless Steel Tank with Enamel Glass Lining
  • Front Thermostat Control

More Info

£79.99INC VAT

Add to basket for...

Redring Undersink Stored Water Heater 6Ltr 1.5kW is rated 5.0 out of 5 by 1.
  • y_2017, m_8, d_18, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_GB, sid_5314P, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix

Add to saved list...

Save
Rated 5 out of 5 by from Very good value Excelent piece of kit works very well and fits in small undersink cupbourds
Date published: 2016-12-01
  • y_2017, m_8, d_18, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_GB, sid_5314P, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix

Can the unit be electrically connected using a 13amp plug into a wall socket or does it need hardwiring back to thr consumer unit?

Asked by: Uboy

What thermal insulation is provided to keep the temperature in the stored hot water?

Asked by: delite
The unit is insulated with CFC free polyurethane.
Answered by: Steve Redring Expert
Date published: 2017-07-23

Can I tee off feed 2m away from heater using onçe solely for heater & the other feed sink and toilet to do without expansion vessel, oh & will I need a durgle.

Asked by: Watsit
You will require a clear pipe run of at least 1.7 meters to avoid using a expansion vessel. The 1.7m of pipe run allows for water expansion.
Answered by: Steve Redring Expert
Date published: 2017-05-13

Measurements please

PLease state dimensions of the under sink water heater
Asked by: Blomberg
The unit measures 270 x 270mm square (as you look at the unit) The depth is 255mm (the amount is stands out from the wall) There is an image in the image gallery showing the measurements if there is any confusion.
Answered by: Steve Redring Expert
Date published: 2017-05-13

do I need expansion tank if cold feed washing maching is adjacent and 'T'd off before water heater feed??

Asked by: JC47
The unit requires a minimum of 1.7m of 15mm pipework between the unit and the first cold water draw off. If the pipework available is less than 1.7m an expansion tank and non return valve are required.
Answered by: Steve Redring Expert
Date published: 2017-07-20
  • y_2017, m_8, d_17, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_en_GB, sid_5314P, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
Specification
Brand Redring
Energy Rating C
IP Rating IPX4
Litre Capacity 6 Ltr
Manufacturer Guarantee 1 Year Guarantee
Model Name CB6L
Pack Size 1
Pieces in Pack/Case 1
Power Output (Watts/Kw) 1.5 kW
Power Voltage Supply 230 V
Product Depth 255 mm
Product Height 270 mm
Product Type Undersink Stored Water Heater
Product Width 270 mm
Temperature Control Type Adjustable Maximum Temperature Stop
Total Product Weight 4.7 kg
Water Heater Application Universal Water Heaters
Water Heater Location Undersink Water Heaters
Water Heater Product Type Electric Water Heaters

230V. W x D x H: 270 x 255 x 270mm. Suitable water pressure: -. Water entry point: . Connection type: . 1.5kW energy consumption. IPX4. . Weight: 4.7kg.

Product contents

Stored water heater, di-electric connectors, pressure relief valve and 1m mains cable with 13A plug.