Pry Bar 203mm
Good pry bar
Bought to remove old skirting boards - has worked a treat so far. Good size for the job, and a nice thin blade to get in behind the wood. All boards have come off without any issue.
22 Apr 2015
Superb at removing studs.
Bought to remove studs from an oak door. Did the job effortlessly leaving no damage. Slim blade to get under what you're removing.
17 Apr 2015
Had one of these for 5 years now. Lost it somewhere so I picked up another one. It's perfect for lifting floor board and removing stubborn nails which only have a little head showing. It's small size has never been an issue. It causes far less damage to things being pry'ed than a conventional crow bar.
16 Mar 2015
an invaluable tool
I had to remove a load of 2" inch nails that had been nail gunned into chipboard flooring and which were completely embedded - this tool made short work of this otherwise near impossible job - by necessity some damage to the chipboard flooring but this is easily repaired - remember to wear safety specs as you are striking hardened metal on hardened metal between the hammer and the pry bar strike zone - the tool has a label on the side to warn you - the blade end is very sharp and slim and I used this to lift the edges of the chipboard without further damage - very happy with this product which is a standard stock item at my local Screwfix store - thanks
9 Mar 2015