Rated 4 out of 5Â by DIYUser21 Just a washer really
Correct number of washers sent in bag.
Dimensions as listed, fits M5 bolt. (no surprise)
Used for clamping thick polythene sheet to wood with stainless screw for garden location.
Looks to be pressed from stainless plate but without too much of a sharp edge to hole on punch exit side.
Not much else to say.
23 Sep 2014
Rated 4 out of 5Â by icelandic penny washers a2
good price and good quality.small pack sizes is a bonus.excellent
10 Aug 2014
Rated 5 out of 5Â by PhatBoi Penny Washers A2 Stainless Ste
Penny Washers A2 Stainless Steel M5 x 25 Pack of 10
They are round, have a hole in them and are stainless.
A bit like a polo but not as minty.
7 Oct 2013
Rated 5 out of 5Â by Asperatus Solid Value
Washers in my pack were 24.37mm in diameter on average and varied by 0.05mm both between washers and between various measurements on the same washer (ie not perfectly round). Thickness was 1.40mm on average, with minimal variation. The washers appear to have been stamped from strip, and have a slight radius on the "top" edges and a slight sharpness to the "bottom edges.
24 Nov 2012