Browse store

Pegler Straight Service Valve 15mm x ½ "mm (19933)

½".

More Info

Bulk saving available

Qty Price per item
1 - 9 £4.49
10 + £4.03
£4.49INC VAT

Add to basket for...

Rated 4 out of 5 by 7 reviewers.
  • 2016-09-30 T11:45:03.485-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_7, tr_7
  • loc_en_US, sid_19933, prod, sort_default

Add to saved list...

Save
Rated 4 out of 5 by Service valve Good quality main thing it did not leek like the one I replaced, 21 May 2016
Rated 5 out of 5 by Tighten up and forget I bought a cheaper version of this valve which came with a plastic washer, I had no end of problems with leaks through the valve. I switched it out for this valve and what a difference. The valve comes with a proper compression olive and once fitted there was not even a slight leak. Don't opt for the cheaper version, this valve will give you less headache and peace of mind. 9 Dec 2015
Rated 5 out of 5 by Job done good Better than the cheaper version which I have also used. These were connected to bathroom sink. Used PTFE around both ends to be sure to be sure. Youtube is the best to find out how if unsure. 17 Nov 2015
Rated 5 out of 5 by Simple but effective Easy to fit, just put in place tightened up the connectors and the job was done. Used a flat-bladed screwdriver to open/close the valve, and happy to see no leaks. 6 Nov 2015
  • 2016-09-30 T11:45:03.485-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_7, tr_7
  • loc_en_US, sid_19933, prod, sort_default
Page : 2 next>
5 Questions  5 Answers

Screwfix Q&A

Ask your questions. Share your answers.

 
 
« Back
 
 
Search:
Sort by:
13 Jan 2016
Customer avatar
by
daventry
Read all my Q&A
, DIY
0points
0out of 0found this question helpful.
Was this helpful?Yes0No0

Answers

Answer: 
Hi Hawklord,

The valve in question has a spigot connection on one end. This can be used to connect to the side inlet but a suitable fibre washer is required to enable the seal to be made.

Thanks for contacting the Technical Help service.
14 Jan 2016
0points
0of 0found this answer helpful.
Was this helpful?Yes0No0
19 Nov 2015
Customer avatar
by
Lymington
Read all my Q&A
, DIY
0points
0out of 0found this question helpful.
Was this helpful?Yes0No0

Answers

Answer: 
Hi,

Unfortunately no these are not full bore as the restriction is through the central ball that revolves to isolate the flow.

Thanks for contacting our Technical help.
19 Nov 2015
0points
0of 0found this answer helpful.
Was this helpful?Yes0No0
19 Oct 2015
Customer avatar
by
Bristol
Read all my Q&A
, DIY
0points
0out of 0found this question helpful.
Was this helpful?Yes0No0

Answers

Answer: 
Hi,

Thanks for contacting Technical Help.
Do you mean the Hexagon nut, if so this is approximately 25mm across.

Regards Tech Help
20 Oct 2015
-2points
0of 2found this answer helpful.
Was this helpful?Yes0No2
19 Oct 2015
Customer avatar
by
Swadlincote
Read all my Q&A
, Other Trade
0points
0out of 0found this question helpful.
Was this helpful?Yes0No0

Answers

Answer: 
Hi Jae T,
This service valve is designed with a standard 1/2" / 15mm inlet connection which is similar to that found on the inlet of 1/2" taps. Therefore if your shower is of the same size, yes this can be used in that application.

Regards Technical Help
20 Oct 2015
0points
0of 0found this answer helpful.
Was this helpful?Yes0No0
24 Aug 2015
Customer avatar
by
Caerphilly
Read all my Q&A
, Maintenance
0points
0out of 0found this question helpful.
Was this helpful?Yes0No0

Answers

Answer: 
Hi Andy,

Thanks for contacting Technical Help. The nut on the spigot end of the service valve has an internal 1/2" BSP thread so providing the flexi tail has the same thread, yes, but you will have to also use a fibre washer to provise the seal between the two parts. The opposite end of the service valve also has a 1/2" BSP thread, but is designed for a compression joint to be made.

I hope this answers your question,

Regards,

Pegler Tech Help
26 Aug 2015
+1point
1of 1found this answer helpful.
Was this helpful?Yes1No0
1 of 1
  • 2016-09-30 T11:42:47.869-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_19933, prod, sort_default
1 of 1
Specification
Brand Pegler
Manufacturer Guarantee 1 Year Manufacturer's Guarantee
Manufacturing Standards BS 6675. WRc Approved
Pack Size 1
Pieces in Pack/Case 1
Pieces in Pack/Case 1
Product Diameter 15 mm
Product Type Straight Service Valve
Thread Size ½ "

Diameter: 15mm.