Multi-Monti Hex Head Shield Anchors 7.5 x 60mm Pack of 50
great bolts for fixing timber
These are great for bolting wood onto brick for decks and floors a wasn't convinced the first time a used them a was more used to old type of resin fixings and shield anchors but was convinced into these and have never looked back only problem is they are a bit on the dear side if they where cheaper a would have gave full 5 stars for all
15 Jul 2013
Used this to fix 75mm timber posts to a brick wall and they worked really well solid and accurate fixing. Saved loads of time
6 Jul 2013
Great fixing, very strong.
I've used hundreds of these fixings at Diameter 12 x 80 and 100 long. They are great. You need to drill a good clean Dia 10mm hole with an SDS drill and go slightly deeper than the screw length. Also blow the hole out so the screw doesn't bottom out on the dust at the bottom. As you screw them in you can hear and feel the teeth on the thread cutting into the concrete. They torque up well and clamp very solidly indeed. The only down side is that they do take slightly longer to fit than the drop in anchor bolts but given their performance this is not an issue for my work. Also, I recommend you use a decent length torque wrench for the bigger sizes as they do take some tightening up. Set the torque value correctly and watch not to over-tighten - they can be sheared if they are bottomed out and you lean against them with a long torque wrench. Highly recomended.
11 Jan 2013
Screws for masonary
Very good product. Close too edge possible. Easy to insert and never had one not tighten as sometimes traditional sheild anchors do.
20 Oct 2012