0500 41 41 41
Cookie Reports - Screwfix Cookie Policy


Mortar Rake 8 x 100mm

Product Code: 71778

For raking out mortar using an angle grinder prior to pointing.

Useable length 60mm.


4.0 5 3

Add to saved list

Available for deliveryNext Day Delivery
Available for collection from store Store Collection Check stock in your store
Page 1 of 4
Page 1 of 4
Mortar Rake 8 x 100mm 4 5 3 3
Good bit of kit Bought this to rake out some lime mortar, did a good job and much easier and safer than a grinding disc! And also doesn't damage face of bricks if you do have an inevitable slip! Does wear out fairly quick (have used three on one side of a house) so not the cheapest way to do it but certainly quick! 24 May 2014
Mortar Rake Slow going, but then again my mortar is VERY hard, real man's mortar! Probably works best on soft crumbly material, or possibly old lime mortar. At least it didn't break like some reviewer's examples, but in places the carbide material has worn away. Only advice I can give is to read manufacturer's instructions re: only use for 5 mins then stop. 26 Sep 2013
Mortor rake 8 x 100mm I bought this to chop out a row of bricks so i could fit a cavity tray, The instructions said to drill a 10mm hole and insert the rake into the hole, I found it a bit slow so i ended up drilling a series of holes along the mortor and then found the tool cleared out the remaining mortor. It also doesn't quite reach to the back of the brick so had to chop out the rest of the mortor by hand. On the plus side it causes less dust than an angle grinder which saves time on clearing up at the end of the job. 14 Jul 2012
1-3 of 3


Manufacturer Guarantee 2 years
Pack Size 1
Product Diameter 8 mm
Product Length 100 mm
Total Product Weight 0.75 kg