Manrose Rectangular Appliance Connector White 100mm
Ducting for extractor fan
I bought this product along with associated ducting, making sure they were all the same size. This was easy as the brochure put all the same size in one column.
I was advised not to use plastic adhesive as if there is a need in the future to modify the ducting, it would need new items. A better way is ducting tape.
11 May 2015
cooker hood extractor connect
theres a bit of confusion on the screwfix site about the inlet outlet sizes on these connectors. this one has a round 100mm inlet on the bottom, you will need a 100mm round connector if trying to join to 100mm pipe. the outlet is the square 100mm not 110/120/125/150/225. Also if making up tight awkward stressed bends etc this can be solvent welded for extra seal and peace of mind.
10 Mar 2015
Needs a connector
I haven't actually fitted this to my tumbledryer yet, but when I put this, and the 100mm round rigid pipe (bought at the same time), together it became clear that the pipe doesn't fit into the round hole... they're both the same size, and you need a connector to join them.
Apart from that, it looks like it will do the job, and far cheaper than other places.
2 Sep 2014
"Good value for the money. happy with the product and would happily recommend".
27 Feb 2012