Browse store

Manrose MG150BS Long Life Axial Bathroom Extractor Fan (22693)

ABS thermoplastic. White square grille. Compliant with Part F of the Building Regulations. BEAB approved.

  • Extraction Rate 230m³/hr
  • Noise Level 40dBA at 3m
  • Ceiling or Wall-Mounted
  • 1 Year Manufacturer's Guarantee
  • Standard
  • Profile Depth: 95mm

More Info

Bulk saving available

Qty Price per item
1 - 4 £34.99
5 + £31.49
£34.99INC VAT

Add to basket for...

Rated 4.8 out of 5 by 5 reviewers.
  • 2016-07-22 T10:49:31.358-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_5, tr_5
  • loc_en_US, sid_22693, prod, sort_default

Add to saved list...

Save
Rated 5 out of 5 by Really effective extractor fan This fan was reasonably priced, easy to fit, even the fixing holes matched the previous fan. It is quiet and very effective. Also the Screwfix, click and collect procedure worked perfectly. Ordered on line (click) after lunch day 1 it was in the local shop for collection after lunch day 2. No wait. DIY user. 14 Sep 2015
Rated 5 out of 5 by Good value extractor fan It's a little chunkier than I expected but the fan has an excellent draw and the noise level is no more than the less powerful one it replaced. Very basic no delay timer but does the job 2 Sep 2015
Rated 4 out of 5 by Decent fan for the money Bought this to replace a 4" fan for my en-suite. The previous fan had a claimed extraction rate of 75³/hr and would not even hold a piece of toilet paper when held directly against the vent. This 6" Manrose model is approximately 3 times more powerful than the fan it replaced. The en-suite where it is now fitted is approx 1.5m x 2m so its not the biggest space and I was hoping that this more powerful fan would remove all traces of steam whilst in the shower. Sadly this is not the case. It is a distinct improvement over my previous fan but I find that it does not remove enough steam to prevent the mirrors from steaming up during a shower (mirrors used to steam up 100% with old fan and are now closer to about 50%). Fan noise is what I would guess is average for a fan of this size (neither very loud nor quiet and sounds roughly equivalent to the 4" fan which it replaced). Fitting was really easy, just remove a couple of screws which hold the front fascia in place then connect the live/neutral wires into the terminal block inside the fan. There is no timer or humidity sensor and fan works when light is turned on/off. I had originally planned to replace the 4" diameter ducting in my attic space from my old fan with some new 6" which would normally be required for this sized fan but after taking another reviewers suggestion of using 2 Manrose duct reducers, one from 150mm to 125m (screwfix code 33275) and a second from 125mm to 100mm (screwfix code 10684) I was able to use my existing ducting. These reducers fit the fan perfectly and give a good seal. Overall fairly happy with this fan as it is a big improvement over my old fan. Can't give any opinion on reliability as it has only been installed for a couple of weeks. 23 Jul 2015
Rated 5 out of 5 by excellent fan bathroom used to steam up with the 4in fan I had. Fitted this 6in fan no steam now. easy to fit very good quality. 1 Nov 2013
  • 2016-07-22 T10:49:31.358-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_5, tr_5
  • loc_en_US, sid_22693, prod, sort_default
Page : 2 next>
1 Question  1 Answer

Screwfix Q&A

Ask your questions. Share your answers.

 
 
« Back
 
 
Search:
18 Aug 2015
Customer avatar
by
LANGLEY
Read all my Q&A
, DIY
0points
0out of 0found this question helpful.
Was this helpful?Yes0No0

Answers

Answer: 
Hello,
I do apologise for the delay in replying. Without specific details I am unable to provide you with a correct answer, however all fans within zone 1 have to be SELV / Low Voltage 12V.
If you need any further information, please contact our technical help desk.
Regards
24 Sep 2015
0points
0of 0found this answer helpful.
Was this helpful?Yes0No0
1 of 1
  • 2016-07-22 T10:41:28.823-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_22693, prod, sort_default
1 of 1
Specification
Brand Manrose
Extraction Rate 230 m³/hr
Fitting Type Ceiling or Wall-Mounted
Fixings Supplied Fixings supplied
Installation Type Wall-Mounted
IP Rating IP24
Manufacturer Guarantee 1 years
Manufacturer Guarantee 1 years
Model No MG150BS
Pack Size 1
Pieces in Pack/Case 1
Pieces in Pack/Case 1
Power Output (Watts/Kw) 20 W
Power Voltage Supply 220-240 V
Power Voltage Supply 220-240 V
Product Diameter 150 mm
Product Diameter 150 mm
Product Height 203 mm
Product Type Long Life Axial Bathroom Extractor Fan
Product Width 207 mm
Switch Type Standard
Switch Type Standard

220-240V. 20W. . IP24. Width: 207mm. Profile depth: 95mm. Fixings supplied. Hole dia: 173mm. Spigot dia: 149mm. spigot exit. . Covered Fixings. . Noise level at 3m: 40dBA. Extraction rate 230m³/hr. Ducting not included.

Downloads

Instruction Manual