Rated 5 out of 5Â by padua6 Pipe Cutters
The particular job the cutters were used for was an external pipe which was accessed by a ladder. They allowed a 90 degree clean cut using one hand (I needed the other to hang on with). As other folk have commented it does away with the inevitable burr that the hacksaw always gives on plastic pipe and you can save time since you donât have to clean it off. I was a bit worried about using it on older pipe (it had been there for 20 years) but I found no problems the cutters went through easily. As another reviewer has commented it does help to rotate the cutter relative to the pipe in order to get started.
Overall, I would say a good product which gives excellent results if you want to avoid the burrs and also on the occasions when you only have one hand available.
5 Jan 2013
Rated 5 out of 5Â by davey666 just as good as rocut
as a plumber for a large company i get through many tools ,i normally buy the rothenberger rocut but got fed up with the price.these are cheap and so far just as good. buy these and save the money.
25 Jul 2012
Rated 4 out of 5Â by SaxonB Reliability not good.
These are really strong cutters and I would have expected them to last even though I use them every day.
Unfortunately, both the circlips which hold the two pivot pins in place have dropped off and got lost after only a few weeks. This means the pins constantly keep dropping out. I have replaced one with a bolt and need to do the other.
Guess I should have returned them, but that would mean managing without or facing the same problem with a replacement pair.
I wouldn't do without.because once you get the knack, the cut is fast, straight and above all clean.
30 Jun 2012
Rated 5 out of 5Â by CowboyPlumber A good pipe cutter
Very solid and well made cutter for plastic pipe and conduit and similar. Slightly let down but the awkward feel of opening the jaws.
21 Apr 2012