Browse store

Laser Brake Caliper Rewind Tool Kit 2 Pcs (12572)

For use on disc brake calipers fitted to most cars with right handed thread. Adaptor 1 is suitable to use with most European and Japanese cars and Adaptor 2 for most Ford, Mazda, Mitsubishi and Toyota cars.

  • For Right Hand Drive

More Info

£19.99INC VAT

Add to basket for...

Rated 3.4 out of 5 by 9 reviewers.
  • 2016-05-04 T06:30:40.423-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_9, tr_9
  • loc_en_US, sid_12572, prod, sort_default

Add to saved list...

Save
Rated 4 out of 5 by Caliper Rewind Tool Kit Done the job I bought it for, Great gadget and saved a lot of time and money. 27 Apr 2016
Rated 4 out of 5 by Real effort saver Thought I'd buy this to make the job of replacing my Honda Civics rear pads a lot easier. It certainly did do that, however even though the box suggested that it was good for Hondas I did have to file a little off of the studs on the adapter to get it to fit. Once that was done though it was plain sailing from there. A very sturdy and easy to use tool. 18 Apr 2016
Rated 1 out of 5 by Mine Was Bad 4 Vauxhall Brakes My review is exactly like engineerily had from 2014. If you buy this then make sure it works on Saturday so you have Sunday to replace it / get another! I started the job in the afternoon on a Sunday! Basically the Vauxhall pins were off by 3mm which means the tool is useless. Luckily I have a great helpful neighbour who grinded down the pins on the inside so that it fit. Perfect...! But No! My piston was fully extended as well so pads were 99% worn. This tool wouldn't fit in the gap to wind it back! By about 3mm again! ARGH! Back to the neighbour who ground off the other fitment pins (which probably wouldn't work as well) and then finally it worked! Great value and will probably last forever but bad QC on the pin locations. 20 Mar 2016
Rated 3 out of 5 by Makes the impossible possible I bought this to change the rear pads on a mk7 Fiesta ST - which had proved impossible to do without this tool. The adaptor was not the most positive of fit, so ensure everything is done up tight before starting to screw the caliper in and it should work well. 20 Feb 2016
  • 2016-05-04 T06:30:40.423-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_9, tr_9
  • loc_en_US, sid_12572, prod, sort_default
Page : 2 next>
2 Questions  1 Answer

Screwfix Q&A

Ask your questions. Share your answers.

 
 
« Back
 
 
Search:
Sort by:
Hi

Just wanted to know if this tool compresses both ways you turn it. My mondeo is specific that the near side is anticlockwise compression and the off side is clockwise.

Thanks
22 Aug 2015
Customer avatar
by
Bristol
Read all my Q&A
, DIY
0points
0out of 0found this question helpful.
Was this helpful?Yes0No0

Answers

Answer: 
No.
It is a screw thread. RH threads compress the piston into the caliper when rotated clockwise, LH when rotated anticlockwise. If your car has both LH and RH treaded pistons inside your rear calipers, you will need a separate tool for each side.
Gerry
31 Jan 2016
Customer avatar
by
yorkshire
Read all my Q&A
, Other Trade
0points
0of 0found this answer helpful.
Was this helpful?Yes0No0
My vehicle is
2009 c3 picasso 1.6 hdi 90hp
Reg: PJZ8301
22 Aug 2015
Customer avatar
by
Craigavon
Read all my Q&A
, DIY
0points
0out of 0found this question helpful.
Was this helpful?Yes0No0
1 of 1
  • 2016-05-03 T06:42:10.851-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_12572, prod, sort_default
1 of 1
Specification
Brand Laser
Pack Size 1
Pieces in Pack/Case 2
Product Depth 47 mm
Product Height 231 mm
Product Type Brake Caliper Rewind Tool Kit
Product Width 138 mm
Total Product Weight 0.731 kg

Product contents

Reaction plate, number 1 (22mm PCD) and 2 adaptor (32.5mm PCD).

Downloads

Instruction Manual