LAP 20A DP Switch with Neon Black Nickel
Very Poor switch
I agree with other reviews, if you put more than 1 wire in the terminal the screw is so small it doesn't hold the wires in place, also found similar problems with other LAP units they should have a clamp type connection rather than a screw because the other problem is if you are using 1 or 1.5 mm cable it can cut the wire.
1 May 2015
2 out of 3 faulty.
Bought 3 of these, fitted, powered up & 2 were faulty. Supply power was fine but wasn't switching to load. Causes hassel & delays needing to take them back to the shop and change them for new ones.
25 Mar 2015
I have used several of these switches recently while fitting a new kitchen.
The good feature is the size of the holes into which the wires go.
The bad feature is the size of the screw that holds them in place.
It is a bit deep in the protective hole and the screw is not really big enough or strong enough to hold the wires in place securely.
Otherwise, it looks good and is good value for the money.
7 Dec 2014
Is the neon light supposed to be on all the time ? Seems a bit pointless otherwise
19 Jan 2013