Browse store

Labgear LDU608G/S 4G Home Distribution Unit 8-Way (44218)

Distributes any combination of Sky, Sky+, FM, DAB, UHF and CCTV signals around the home. Automatically cuts out 4G interference.

  • Single Drop Cable
  • Gain per Port: ±7dB
  • Noise Figure: 4dB
  • F-Type Connectors
  • FM: 88-108MHz
  • DAB: 217-230MHz
  • CCTV: 470-862MHz
  • UHF: 470-862MHz
  • SAT: 950-2300MHz

More Info

£92.98INC VAT

Add to basket for...

Add to saved list...


Can I input the RF2 output from a Sky box and an aerial to distribute through the output channels

Asked by: JMacld
Yes Via the Uplink, the signals from the UHF aerial goes into the UHF Input on the Home distribution Unit then the signal goes out of the Downlink connection via a coaxial cable to the Triplex/Quadraplex Plate which has a UHF connection. This UHF signal from the aerial then goes into the RF (UHF) Input of the Sky Box where it is mixed in with the Sky Box Signal and the combined/mixed signal then emerges from the RF2 of the Skybox (Make sure that the RF2 Output channel is set to a channel between 21 and 59 as 60 and above will be blocked by the integrated 4G Filter on the Home Distribution Unit).
Answered by: Philex Electronic
Date published: 2017-06-03

I presume this model supports IR return (i.e. Digi Eye). Is this correct ?

Asked by: George2a
Hi, thank you for asking - this unit does support IR Return. Thanks
Answered by: Philex Electronic
Date published: 2017-01-29

Hi, we have Sky+, which has shotgun cable from the dish to the sky box,

From the sky dish what inputs on the LDU unit would these 2 cables connect too and would this leave any further inputs available for other connections, re - FM and Coax ?? Apologies for ignorance, not up to date with technology!!! Many thanks
Asked by: Cadogan29
Hi no problem, on the distribution unit there are two dedicated Dish inputs marked LNB 1/2 on the LDU unit, this would leave further inputs for UHF/CCTV/FM/DAB. Any problems please call our technical helpline on 08457 573479 where we will be pleased to assist further if required. Thanks
Answered by: Philex Electronic
Date published: 2017-01-15

With the CCTV input, does it mean that all TV connected to the unit can monitor the CCTV on a separate setup channel?

Asked by: Timmy18
Hi, This can be done if an RF Modulator is fitted between the CCTV System and the Input on the LDU unit you can select an RF channel that the receiving TV sets can tune in. Thanks
Answered by: Philex Electronic
Date published: 2017-06-23

Does it distribute VHF signals?

Asked by: June56
Hi yes this product has a VHF/FM Input - Thanks
Answered by: Philex Electronic
Date published: 2016-01-04
  • y_2017, m_7, d_17, h_4CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_GB, sid_44218, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
Brand Labgear
Colour Silver / Grey
Manufacturer Guarantee 1 Year Guarantee
Model No LDU608G/S
Pack Size 1
Pieces in Pack/Case 1
Product Depth 35 mm
Product Length 350 mm
Product Type Home Distribution Unit
Product Width 115 mm
Total Product Weight 0.95 kg

Freq. range: 87.5-862MHz. ±7dB gain.

Product contents

LDU608G/S, F-type lead and power cord.