Browse store

Klima Underfloor Heating Mat Kit 1.5m² (86977)

KEMA. Easy to install, thermostat controlled electrical heating mat kit with floor sensor and probe. Simple to operate. Suitable for bathrooms and wet areas (provided an RCD is used).

  • Suitable for Floor Tiles
  • IPX7
  • Energy Efficient
  • 10 Year Manufacturer's Guarantee (T&Cs Apply)
  • Professional Installation Required
  • Comfort Heating Only
  • Earthed & Fully Protected
  • 10 Year Mat & 2 Year Thermostat Guarantee
  • Simple & Easy to Operate

More Info

£74.99INC VAT

Add to basket for...

Add to saved list...


Is this matting suitable to go under an 18mm engineered oak floor?

Asked by: ProjectMoneypit
Hello, It is possible, but you would be required to lay a 10mm latex self-leveller above the underfloor heating first. We also offer a foil system, suitable for directly under the wood. If you look at product code 63623 with screwfix
Answered by: Klima Underfloor Heating
Date published: 2017-04-08

Can the thermostat be installed in the bathroom / shower room

Asked by: 10Watt
Hello, Yes it can. The mat is fully earth sheathed and waterproof so is completely​ safe for installing in a bathroom/shower room. It must still be RCD protected
Answered by: Klima Underfloor Heating
Date published: 2017-04-16

How is underfloor heating laid over a suspended timber floor?

Should you: Lay 12mm [minimum] marine plywood. 2. Spread 1-2mm tile adhesive. 3. Lay 6 or 10mm thermal board. 4. Lay thermal heating mat. 5. Spread tile adhesive. 6. Lay ceramic tiles. 7. Connect heating circuit directly to the main fuse board.
Asked by: Gorhar
This is a correct way to lay. The thermal boards come with fixings for wood, so a layer of tile adhesive is not required
Answered by: Klima Underfloor Heating
Date published: 2017-04-24

Does the thermostat also give timed events i.e. programmable?

Asked by: Anonymous
Hello, No, the thermostat provided is a standard on/off manual control thermostat. You can purchase the intelligent control thermostat (product code 4583D) for a programmable function
Answered by: Klima Underfloor Heating
Date published: 2017-03-25

Hello, is it possible to cut the mat. Obviously not the cable, just the matting. Thanks

Asked by: Hutchie3610
Hello, The matting is made from a fibreglass mesh, however, you must be careful not to cut the cable in any way. The cable can easily be removed from the matting, which is recommended to do before cutting.
Answered by: Klima Underfloor Heating
Date published: 2017-04-18
  • y_2017, m_5, d_25, h_8CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_GB, sid_86977, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
Brand Klima
Colour Grey, Red & White
Coverage Per Pack 1.5 m²
Fixings Supplied Fixings Not Supplied
Installation Type Professional Installation Required
Insulation Type Insulation Board Recommended
IP Rating IPX7
Manufacturer Guarantee 10 Year Manufacturer's Guarantee (T&Cs Apply)
Manufacturing Standards KEMA
Model No 243306
Pack Size 1
Pieces in Pack/Case 1
Power Output (Watts/Kw) 225 W
Power Voltage Supply 230 V
Product Depth 86 mm
Product Diameter 86 mm
Product Length 3 m
Product Thickness 4 mm
Product Type Underfloor Heating Mat Kit
Product Width 500 mm
Total Product Weight 1.2 kg

225W. Cable type: XLPE. Max floor temperature: 40°C. 150W/m². RCD Required. Single-Sided Connection. W x D x L: 500 x 86mm x 3m. Fixings Not Supplied. Insulation Board Recommended.

Product contents

Floor heating mat, manual thermostat with probe, floor sensor tube and instruction manual.