Browse store

Klima Underfloor Heating Foil Kit for Wooden Floor 5m² (63623)

Suitable for new builds, extensions or existing rooms. Design service and technical advice available. Visit www.klima.co.uk or call 01887 822020. Moisture barrier supplied separately (Code 68690).

  • Suitable for Laminate & Floating Engineered Wood Flooring
  • IPX1
  • Energy Efficient
  • 2 x Double-Layer Polyester Carbon Heater & Copper Leads Construction
  • Model No:
  • Suitable for Lounge, Dining Room, Hallway & Bedroom
  • Comfort Heating Only
  • SEMKO Approved
  • Professional Installation Required

More Info

£199.99INC VAT

Add to basket for...

Add to saved list...

Save

How wide is the role of Klima heating foil

Size needed but not given, to work out how much is required
Asked by: FormableHoneycombCore
The 5sqm foil system is 600mm wide by 8.4mtrs in lengh. The foil can be cut length ways every 20cm at the marked point on the foil, but cannot be cut width ways. The lengths of foil can then be connected in parallel using the crimps and wires provided.
Answered by: Klima Underfloor Heating
Date published: 2017-07-02
  • y_2017, m_7, d_23, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_GB, sid_63623, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
Specification
Brand Klima
Construction Material (Heating) 2 x Double-Layer Polyester Carbon Heater & Copper Leads
Coverage Per Pack 5 m²
Fixings Supplied Fixings Supplied
Insulation Type Insulation Required: 6mm Foam
IP Rating IPX1
Manufacturer Guarantee 10 Year Manufacturer's Guarantee (T&Cs Apply)
Manufacturing Standards EN 60335-2-96:2002+A1, SEMKO Approved
Pack Size 1
Pieces in Pack/Case 1
Power Voltage Supply 230 V
Product Type Underfloor Heating Foil Kit for Wooden Floor
Suitable Use Type Suitable for Laminate & Floating Engineered Wood Flooring

. Cable type: Double-Insulated 1.5mm² Copper Connection Wire. Max floor temperature: 27°C. 120W per m². RCD required. Amp connectors. W x D x L: x x . Fixings Supplied. Insulation Required: 6mm Foam.

Product contents

Foil kit, sensor in flexible sensor tube, insulation tape, connection crimps, connection cables and crimp tool.

Downloads

Instruction Manual