Browse store

JSP Force 8 Half Mask Without Filters (22485)

Twin-cartridge, half mask with low resistance exhalation valve, offers protection against particulates, vapours and many gases. Durable thermoplastic rubber construction. Fully adjustable 4-point cradle harness with quick-release. For coordinating filters please choose: (Code 68192) for MDF, (Code 62358) for paint and (Code 87483) for dust.

  • Typhoon Valve for Low Breathing Resistance
  • Fully Adjustable Elastic Harness
  • Reflective Strips for Increased Visibility
  • Range of Filters Available

More Info

£13.99INC VAT

Add to basket for...

Rated 4.4 out of 5 by 35 reviewers.
  • 2016-09-30 T11:45:06.176-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_35, tr_35
  • loc_en_US, sid_22485, prod, sort_default

Add to saved list...

Save
Rated 1 out of 5 by Good idea but poor design I'm on the third of these masks. If the specs are to be believed then for the money you won't find higher spec filtration and mask. The issue I have is with the harness. On one of the three the clear plastic cover on the front popped off and I couldn't get it back on, so I took that back, and on the other two the harness just came away from the mask within a year. I don't think they were poor quality, just poor design. There's nothing holding the harness on except for a bit of glue, and through normal wear and tear, it just eventually fell off. It's not a huge sum of money, but I don't want to be buying a new mask every year. The filters yes, but not the actual mask. Until they fix this issue, I would suggest finding one where the harness passes through some sort of buckle, or is riveted on. 20 Sep 2016
Rated 5 out of 5 by Buy this first. Been messing around with disposable makes for the past 2 years but got fed up with them breaking and not knowing when they're dead. This mask is awesome, it's a superb fit and very comfortable to. The click to test valves are a good idea to make sure the mask has a good seal on your face. The spare filters are cheaper than 5 disposable marks and will surely last much longer to. Highly recommended. 28 May 2016
Rated 5 out of 5 by Great for spectacle user Bought this in the hope that I wouldn't get steamed up glasses every time I try to use it. I was pleased to find that I was able to achieve this dream! The filtration is good, better than any other mask I have tried, gets a good seal around the face and is not too uncomfortable. 10 Apr 2016
Rated 2 out of 5 by Poor filter connections Fits well, great visibility. Doesn't steam up. Main gripe is the seals around the attached filters. I found the filters excessively tight and difficult to get on. Despite that, the seal itself makes an inconsistent seal on the mask - removing it reveals an indent around two-thirds of the foam ring, and no apparent indent on the remaining third. This was happening on both sides. There appears to be a design flaw with the connection. Would I buy it again? No, I'd go for the 3M Mask instead. I wouldn't trust this for any more that nuisance dust. 24 May 2016
  • 2016-09-30 T11:45:06.176-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_35, tr_35
  • loc_en_US, sid_22485, prod, sort_default
Page : 2 3 next>
2 Questions  2 Answers

Screwfix Q&A

Ask your questions. Share your answers.

 
 
« Back
 
 
Search:
Sort by:
10 Jun 2016
Customer avatar
by
Lowestoft
Read all my Q&A
, DIY
-2points
0out of 2found this question helpful.
Was this helpful?Yes0No2

Answers

Answer: 
The P3 Filters will be suitable 5756F if only slight movement of asbestos. If the user is removing and breaking up of asbestos in a Industrial operation then Air fed respiratory must be used to fully secure the user.
8 Jul 2016
Customer avatar
by
Anonymous,
+2points
2of 2found this answer helpful.
Was this helpful?Yes2No0
I have used other masks and have to wear spectacles but I have to adjust the position of the mask so that the part that sits on the bridge of my nose allows for the specs to sit properly which then allows exhaled breath to escape above my cheeks and steams up my specs.
2 Dec 2015
Customer avatar
by
Southampton
Read all my Q&A
, DIY
0points
0out of 0found this question helpful.
Was this helpful?Yes0No0

Answers

Answer: 
The Force 8 half mask is designed to incorporate specs/Goggles, alternatively you can try 36021 FilterSpec Pro which gives you room to wear spectacles, alternatively the option to for RX Inserts.
8 Jul 2016
Customer avatar
by
Anonymous,
0points
0of 0found this answer helpful.
Was this helpful?Yes0No0
1 of 1
  • 2016-09-30 T11:42:51.598-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_22485, prod, sort_default
1 of 1
Specification
Brand JSP
Clothing Size Description One Size
Colour Grey
Construction Material (Safety) Rubber
Construction Material (Safety) Rubber
Gender Unisex
Gender Unisex
Manufacturer Guarantee 1 Year Manufacturer's Guarantee
Manufacturer Guarantee 1 Year Manufacturer's Guarantee
Model Name Force 8
Pack Size 1
Pack Size 1
Parent Colour Grey
Pieces in Pack/Case 1
Pieces in Pack/Case 1
Product Type Half Mask Without Filters
Valve Type Typhoon Valve for Low Breathing Resistance

EN 140.

Downloads

Instruction Manual