JG Speedfit WFLX22 Flex Tap Connector 22mm x Â¾" x 300mm Pack of 2
This hose isn't as advertised
The product details are incorrect. The hose bore size isn't 19mm as stated. At the tap end it's 13mm and at the push fit end it's less than 8mm. Not very satisfactory at all. If you need a flexi fitting buy one of the other cheaper hoses. Most give 13mm internal bore. These would seriously restrict the flow. 22mm to 8mm rediculous. You'll end up with a tap that trickled.
15 Apr 2015
Would be better if it had an isolation valve included. Otherwise, worked very well.
7 Apr 2015
These push fit fitting cut the labour down on all plumbing jobs allowing us to cut the cost for our clients, excellent value .
24 Nov 2014
Easy to fit
Used these when fitting a replacement bath that was slightly longer than the old one. Fitted to taps before setting bath in position then it was a simple push fit to copper pipes.
Flexible enough to take up change in position.
Much easier than separate tap connectors and rigid copper pipework especially in a tight space.
Would definitely use again.
Make sure the pipe you are connecting to is 22mm and not 3/4" - they are slightly different size.
24 Feb 2014