IP55 Enclosure Grey 150 x 85 x 65mm
Could be better
Why have two centre fixing points on the backbox when the front cover only uses the corner screw points? This prevents a third hole being cut on the long side which would have made this box very useful. There are better boxes for the price.
8 Mar 2015
IP55 Grey enclosure 150x85x65
Beaware of this item product code 35121.
The reason I have given it as an overall rating of 1 star, is that it is listed as 150x85x65 actually it turns out to be 150x85x50 so be carefull if you are looking for a150x85x65 unit.
Screwfix should change the size details in their catalogue.
I have not used the unit so I cannot give any other ratings
23 Dec 2014
Fine, but smaller than stated
Note the dimensions given are 150 x 85 x 50mm, not 150 x 85 x 65mm. Otherwise it is fine
20 Dec 2014
Firstly, the dimensions are incorrect: 150 x 85 x 65mm is wrong. It is actually 150 x 85 x 50mm. These are external dimensions too. It would be more useful to have correct INTERNAL dimensions. (I would post these, but it's all fitted now). I bought it to house a transformer, but by the time I had drilled my holes it was too late. Secondly, the screws for holding it together are like soft aluminium and the screw holes are very tight. The screws just chewed up while tightening/untightening. In the end I used steel screws, but even they were tough to secure due to the small holes. The rubber seal is good and the box is strong. To be more waterproof, I would like to see a couple more screw ports in the middle, but that's just me. It is very secure.
23 Nov 2014