Hilka Pro-Craft Oil Suction Gun 500cc
Quality metal construction rather than the usual plastic rubbish.
The supplied hose is only about 12 inches long, but found some spare windscreen washer tubing which slid nicely inside it. This was then long and narrow enough to push into the dipstick hole of an engine block to extract some surplus oil, without all the fuss and mess associated with using the sump plug.
20 Mar 2015
Quality and value for money !
Bought this product to drain the axle on my 95 Camaro, as it does not have a drain plug on it, and the workshop manual tells you to remove the cover plate to drain oil !
This would be OK I guess if you had a new gasket to replace with, (but as its American, not readily available over here !)
I got out the old oil in about 5 mins, the tube holds 1 pint of fluid, and I filled it 3 times, and then tried to get any more old oil out, but that was it !
You can tell when you're not getting any more by the slurping sound !
Then I simply used the pump to replace the 3 pints I had removed !
Excellent piece of kit, highly recommend ! 5 star all round !
23 Feb 2015
better than on the internet for a quality product, it seems like a product that will last a lifetime , making my gearbox oil changes very very quick
16 Feb 2015
Good quality item which seems well made, the plastic tubing could be stiffer as it is difficult to fit properly on the pump. Once on though it has a good seal. It works and was a godsend for filling the differential and gearbox on my MX5 which are both difficult to access.
9 May 2014