Rated 5 out of 5Â by creamcrackered good angles
I bought these angle brackets to make a shed base as they were galvanised, they were very reasonably priced and a box of 25 was enough to do the job, very happy with the strength and quality of finish, I used the Decktite 40mm screws on a recommendation also very good.
16 Aug 2014
Rated 3 out of 5Â by TheBeehiveBuilder Look ok but not perfect
Bought these to fix the roof onto a summerhouse. They're good enough for the job but came set to about ninety five degrees, easily fixed with a vice and hammer but not something I expected to have to do.
16 Apr 2014
Rated 5 out of 5Â by rwb1012 Really tough
I've used these in the past for fence rails and they are still not rusty after several years.
More recently I've been using them in place of joist hangers for mounting noggins in difficult positions - at the edge of flooring where you can't get to the other side. I use two at each end - one underneath and one at the side to prevent rotation. This arrangement is stronger than most hangers.
At 2.5mm thickness they really are heavy duty and every one I've ever used has the holes in in exact same positions.
The price isn't too bad for a box of 25.
4 Mar 2014
Rated 5 out of 5
Â by TrevDIYer Heavy Duty Angle Bracket
I purchased these as they were the best value for money that I could find from any of my local DIY stores. They are 2mm thick and really perform well. The maximum size screw you can use (without any modifications to the holes) is a No 5. I have uploaded a photo to give you a feel for the pitch of the holes.
13 Nov 2013