Rated 3 out of
Don't get me wrong the radiator is good. It has even heat distribution and very good powder coat finish. I didn't rate it higher because it's let down by the mounting brackets. Unless all 4 are pin-point level, it wobbles! What the brackets are missing are nylon seats for the rad to sit on which would remove the 'metal to metal' catching and help with the 'wobble' issue.
Date published: 2017-02-24
Rated 1 out of
ximax verticle radiator
Don't buy from screwfix they do not take responsibility for there faulty products
this radiator is not fit for purpose it surely is not 55 kg
Good luck in trying to fix this to the wall with the rubbish fixings from screwfix ... there are a liability weighting to happen
Date published: 2017-01-09
Rated 5 out of
High output & stylish design
First installed some of these for a customer who supplied his own. Always thought they were low output compared to conventional rads, but I was so impressed that I wanted some for my own home.
I have installed two single ones in my lounge, behind my sofas in the anthracite colour. They have a good quality finish and a high output. They take a bit longer to get up to temperature because of the height, about 15mins, and also because there connected to the existing 10mm pipe. The room gets hot quickly and they look very stylish.
Anyone looking for something modern and stylish without compromising heating your home I highly recommend these radiators.
Date published: 2016-12-03
Rated 5 out of
These radiators to me are stunning ! Good value and very good quality. Would recommend to anyone
Date published: 2016-01-22
Does stated width include valves or not?
Can anyone tell me if the stated width includes the valves either side or if it is strictly the width of the radiator itself, with valves extra? Could make all the difference to me, so if anyone could confirm, I'd be grateful. Thanks.
Have the fittings changed?
I did not get any instructions and the brackets supplied are not the same as shown in the online instructions. As a result am unsure how to fit.
What valves do I need for this ?
what matching valves do i need for 34057 Ximax
Can you tell me the centres for the pipes by any chance?
|Coating & Finishing Type
|Construction Material (Plumbing)
|Height x Width
||1800 x 590
||10 Year Manufacturer's Guarantee (T&Cs Apply)
|No. Of Sections
|Pieces in Pack/Case
|Power Output (Watts/Kw)
||Duplex Designer Radiator
|Radiator Height Band
||1800mm or Greater
|Radiator Width Band
||Suitable for Hot Water Central Heating Systems
|Total Product Weight
H x W: 1800 x 590mm. Depth (min. to max.): 106-106mm (depending on use of brackets). Wall to centre (min. to max.): 60-60mm (depending on use of brackets). Pressure tested to 13bar. Max. working pressure 10bar. Heat outputs calculated at Delta_T50k. Max. working temperature of 95°C. EN 442.
Radiator, fixings, plug and vent.
*Delivered direct from our suppliers in the number of working days stated on the delivery button