Can you buy the treads for this staircase individualy?
Hi. Thank you for your question. The staircases are pre made kits and we are unable to sell the treads seperately.
Date published: 2016-08-06
can the Stair turn one way and then the other in a 'S' Shape
Does anyone know waht the minimum space needed for the above I calculated 109cm by 109cm. Although each turn could be achieved in a smaller area but they are offset. I have a very small space.
The stair can not be configured as an S unfortunately. You can have one turn at the bottom or at the top but the stair will only work with one turn. The minimum space required for the staircase would be 140cm.
Date published: 2016-01-17
Can one tread be taken out to reduce the height below 2120mm?
We have a floor to floor height of 1970mm
Thank you for contacting us. Unfortunately the staircase centre pole would be too high to accomodate a floor to floor height of 197cm.
Date published: 2016-01-04
I assume that this stair case is not building regs compliant
Ok for occasional use to access storage rooms etc. please advise
Thanks for the question. The staircase can be building regs compliant for use to a living space so long as there is no room for a more standard staircase. It's really something at the discretion of each inividual building inspector.
It is fine for access to storage however.
Date published: 2015-10-31
||White / Light Birch Plywood
||Fixings & Fittings Supplied
||2 Year Manufacturer's Guarantee (T&Cs Apply)
|Pieces in Pack/Case
||Alternating Tread Spacesaver Staircase
|Total Product Weight
Overall W x H: 600 x 2120-2590mm. Hand rail length: mm. Newel width: mm. Spindle height: 900-1100mm. Tread W x D x Th: x 35 x 35mm. Fixings & Fittings Supplied. Weight: 120kg.
1 x metal spine, 10 x treads and assembly instructions.
*Delivered direct from our suppliers in the number of working days stated on the delivery button