Flip Driver Set of 3
Waste of money
Bought one of these some time ago, went to use it today and the holder mechanism doesn't retain the inserts at all. Threw it in the bin and went back to my old manual screwdriver.
11 Jun 2015
Not a good buy
If you leave the screw driver bit in, it doesn't fit in your chuck, which defeats the object, plus when you do manage to get it in your chuck, the body of it is that soft it crushes, plus the counter sink burns rather than cutting. Hence I will be returning them to the store.
13 May 2015
Bought this and only used to countersink a dozen screws and ball bearing fell out of holder.traveled back to ScrewFIx and exchanged for another set.
Traveled back to site to start again and put in drill and found shank was slightly bent and caused rotation of drill bit to wobble.
Returned to store and handed back and bought De Walt set .
Lost about 4 hours work plus traveling back and forward to ScrewFix on two occasions.
Lesson learned not to buy inferior equipment again.Stick to quality brands.
8 May 2015
Piece of rubbish
Bit jammed in the holder after driving 5 screws. Now it has to be prised out with pliers each time
28 Mar 2015