Flexible Tap Connector With Valve 22mm x 3/4"
Had real issues getting the compression joint at the valve ends to seal properly, ended up having to use a LOT of PTFE tape.
Once fitted the taps would only dribble. As per another review the bore of these connectors is quite small and it just doesn't work with my low pressure system.
Have now replaced with custom pipes made with polyplumb.
4 Apr 2013
DONT NOT USE!!!
If you have a low pressure system.
The hose only has a 8mm bore.
10 Jan 2013
Purchased to replace existing flexihoses. I wanted ones with isolating valves so that I could change any tap washers. Perfect fit, exccellent quality and excellently priced!
Now fitted to Bath in less than 30 mins!
6 Jul 2012
Got these to fit at the mother-in-laws in Sidmouth. Easy to fit with the added bonus that you can isolate the water supply when replacing the taps, ideal when you are on metered water and it also meant that the water was only off in the remainder of the house for a few minutes.
30 Dec 2009