Fischer WD 8x100 Wall Mounted Basin Fixing Kit
17mm nut btw
Just what I needed. Fixed up a couple of sinks with these now. Nut is plastic so you have to go easy - don't overtighten or it'll jump the thread. Hole diameter is 10mm and nut is 17mm (so worth getting a 17mm spanner in too while you're here).
19 Mar 2015
Fischer basin fixing kit
With the spacer, washer & nut - all in one piece, it was simple to fit with one hand and not fear dropping any of the fiddly bits.
8 Feb 2015
Best Basin fixing
Great kit makes fixing the basin really easy, mark up drill put in plugs then the studs, offer up the basin and fix with the plastic nuts,
Far easier then using bolts, rather expensive but worth it.
5 Dec 2014
Super strong product
These bolts are FAR bigger then they look in the picture but appear to be very strong indeed.
Unlike the WC fixing kit, all items supplied in the packet are used during installation.
14mm drill bit fits it perfectly but seems sensible to drill out with a smaller bit first.
Be careful which spanner you used to screw them in the wall. I used an 8mm which may have been a little too big and it snapped so continued on by using a pipe wrench which worked well.
Additional washers would help also as the nut threads do not tighten up far enough on their own to secure the basin.
26 Mar 2014