Browse store

Fischer FIS VT VT Vinylester Chemical Mortar Resin 380ml (14364)

2-component chemical injection resin based on vinylester. For use in non-cracked concrete and masonry. Use with 380ml applicator gun (Code 16539).

  • High Load-Bearing
  • Automatically Mixes via the Static Mixer Nozzle
  • For Use With Threaded Rods FIS A & RG M
  • ETA-08/0061

More Info

Bulk saving available

Qty Price per item
1 - 4 £12.95 (£34.08/Ltr)
5 + £11.65 (£30.66/Ltr)
£12.95INC VAT (£34.08/Ltr)

Add to basket for...

Fischer FIS VT VT Vinylester Chemical Mortar Resin 380ml is rated 4.8 out of 5 by 4.
  • y_2016, m_12, d_2, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_GB, sid_14364, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=AGE, direction=DESCENDING)]
  • clientName_screwfix

Add to saved list...

Save
Rated 5 out of 5 by from Fischer FIS VT VT Vinylester C Used this product to fix M16 stud bar to secure steel beam pad stones on a self-build extension, application was easy, curing time excellent, all round does what it says on the packaging
Date published: 2016-02-03
Rated 5 out of 5 by from Fischer Chemical Resin Great product, reasonable price, easy book online ordering with Screwfix and ready to collect when I arrived!
Date published: 2015-06-07
Rated 4 out of 5 by from Great chemical anchor Recently ran out of chemical anchor supplied on site so had to pop out to Screwfix for a couple of tubes of this. Does exactly what's required; sets rapidly and permanently. Recommended.
Date published: 2015-05-30
Rated 5 out of 5 by from Great stuff Have used it before and it is brilliant. Just remember that you need a special gun to use it, it doesn't fit a normal mastic gun
Date published: 2015-04-24
  • y_2016, m_12, d_2, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_GB, sid_14364, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=AGE, direction=DESCENDING)]
  • clientName_screwfix
5 Questions  5 Answers

Screwfix Q&A

Ask your questions. Share your answers.

 
 
« Back
 
 
Search:
Sort by:
 
1 Answer

Once started

Once I've started using the resin does the whole tube need to be used in one go, or can I stop and come back to it later? i.e. does it cure in the nozzle? Thanks.
7 Nov 2016
Customer avatar
by
Bath
Read all my Q&A
, DIY
0points
0out of 0found this question helpful.
Was this helpful?Yes0No0

Answers

Answer: 
Thanks for your enquiry. When you use the resin, Take the cap off the cartridge and fix the mixing nozzle, squeeze out about 50mm to ensure that it is a nice consistent grey colour, then use in the holes. Leave the nozzle on when you have finished (do not replace the cap) The resin will keep perfectly well until its expiry date. When you wish to use again simply replace nozzle and start again.
Regards Technical.
7 Nov 2016
+2points
2of 2found this answer helpful.
Was this helpful?Yes2No0
I need to fix 10mm rebar bars into exerting wall and the other end will go into concrete slab.
3 Sep 2016
Customer avatar
by
Orpington
Read all my Q&A
, DIY
-2points
0out of 2found this question helpful.
Was this helpful?Yes0No2

Answers

Answer: 
Thank for your enquiry, FIS VT 380 C is suitable for masonry and concrete. If using M10 threaded rod the drill hole Ø will be 12mm if using 10mm Rebar the drill hole Ø will be 14mm
Regards
Technical.
5 Sep 2016
0points
0of 0found this answer helpful.
Was this helpful?Yes0No0
30 Aug 2016
Customer avatar
by
Burghead
Read all my Q&A
, Plumbing/Heating Engineer
0points
0out of 0found this question helpful.
Was this helpful?Yes0No0

Answers

Answer: 
Thanks for you enquiry,
You will require an 18mm Ø drill hole. Depth will be dependant on substrate and loads required.
Regards
Technical.
30 Aug 2016
+3points
3of 3found this answer helpful.
Was this helpful?Yes3No0
1 Jul 2016
Customer avatar
by
glasgow
Read all my Q&A
, Joiner/Carpenter
0points
0out of 0found this question helpful.
Was this helpful?Yes0No0

Answers

Answer: 
The FIS VT resin will be suitable if installed into a standard drilled hole (rough edges and not diamond drilled).
However, please be aware that in some granite the resin can 'leach' into the surface which cannot be removed.
We recommend a test on your stone in an unseen area where the resin can be left to cure for a while to see if this is the case.
Curing is temperature based and is the temperature of the substrate.
There is a table on the side of the tube - 10-20° = 5 minutes working time and 60 minutes to fully cured and ready for loading.
4 Jul 2016
+2points
2of 2found this answer helpful.
Was this helpful?Yes2No0
8 May 2016
Customer avatar
by
boston
Read all my Q&A
, DIY
0points
0out of 0found this question helpful.
Was this helpful?Yes0No0

Answers

Answer: 
Resin anchor sleeves are available but are only recommended for use into hollow masonry. They are available as standard diameters, and different lengths, for M6-M16 threaded rod
9 May 2016
0points
0of 0found this answer helpful.
Was this helpful?Yes0No0
1 of 1
  • 2016-11-18 T05:37:41.356-06:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_14364, prod, sort_default
1 of 1
Specification
Brand Fischer
Manufacturer Guarantee 1 Year Guarantee
Manufacturing Standards ETA-08/0061
Model No FIS VT
Pack Size 1
Pack Size 1
Pieces in Pack/Case 1
Pieces in Pack/Case 1
Product Diameter 68 mm
Product Type VT Vinylester Chemical Mortar Resin
Sealant Adhesive Volume 380 ml

ETA-08 / 0061.

Downloads

Safety Data Sheet (COSHH)