Fernox LS-X Leak Sealer 50ml
Fernox Leak Sealer
This product performs excellently for jointing BSP fittings as well as sealing 'old' weaping joints.
A must have for all tool boxes!
It is silicone based but the fittings are watertight immediately so you do not need to allow time for the paste to cure.
NOT FOR USE ON GAS FITTINGS.
12 Oct 2011
A must for all your sealant needs, I use this when doing all my plumbing diy
26 Feb 2015
Super Duper Joint Sealer
I've been using this for years, for plumbing and heating installations. I have only used it as a "belt and braces" sealant on threaded and compression/union type plumbing fittings, and have not had a single joint leak since I started using it. On threaded joints (i.e: radiator/valve etc) I still use PTFE tape and then a smear of LS-X. On compression fittings I put a smear of LS-X around the olive before assembling the joint. If you need to disconnect the joints later then no problem, the cured LS-X just peels off, and you can reassemble again without problem. Brilliant stuff, any excess just wipes off with rag, leaves a clean joint. It can apparently be used to stop leaks without disassembling, but I have not tried this so cannot comment. Lasts a long time, but you must replace the cap immediately to stop it curing in the tube
25 Feb 2015
NO PROBLEMS USING THIS PRODUCE, JUST GET THE TOP BACK ON TUBE ASAP. IT SOON GOES OFF
23 Feb 2015