Browse store

Evo-Stik Fast Set Floor Tile Adhesive Off-White 5Ltr (24881)

Suitable for wood or concrete floors as well as ceramic, terracotta, limestone and quarry tiles. Accelerant sachet included. Sets in 4 hours. Covers up to 2m².

  • Suitable for Interior Concrete & Wooden Floors
  • Water-Resistant

More Info

£18.99INC VAT (£3.80/Ltr)

Add to basket for...

Evo-Stik Fast Set Floor Tile Adhesive Off-White 5Ltr is rated 4.6 out of 5 by 9.
  • y_2017, m_3, d_20, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_GB, sid_24881, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix

Add to saved list...

Save
Rated 1 out of 5 by from a rapid settting adhesive? Says everywhere that it sets in 4 hours - which is why I bought it - I put the tiles down 8 hours ago and it's still not even close to hardening. Total waste of money.
Date published: 2016-12-12
Rated 5 out of 5 by from Decent adhesive Very easy to spread and make a perfect adhesive bed for floor tiles
Date published: 2016-04-07
Rated 5 out of 5 by from Tile adhesive Easy to use, had no problems. How even it did take more than 2 days to fully go off.
Date published: 2015-06-28
Rated 5 out of 5 by from Best Tile to Concrete Adhesive By far the best tile to concrete floor adhesive I have used. Mixing is easy but you are better off mixing the whole batch at once. Dries quickly but with plenty of working time. Would recommend above all others.
Date published: 2015-05-30
  • y_2017, m_3, d_20, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_GB, sid_24881, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix

can I tile on top of the old floor tiles

Asked by: camp

Is this adhesive suitable for a first floor bathroom? I have heavily screwed down ply over the floor boards and pva'd it in preparation

Asked by: Jovie
The Evo-Stik Fast Set Floor Tile Adhesive is a two part fast setting adhesive designed for bonding floor tiles such as ceramic, slate and quarry tiles to rigid wooden floors, however it is not suitable for bonding porcelain and some other tiles so you will need to check the tiles you have for compatibility. The product can be used in a suitable bathroom floor application where there may be some splashing, wetting and condensation, but it is not recommended for use in a wet room or an actual shower area. If applying to plywood then the plywood will need to be 15 mm thick if it is overlaying existing floor boards and be screwed down at 300 mm centres. PVA can be used as a primer for porous surfaces where it needs to be applied diluted at a ratio of 1 PVA to 4 parts water by volume and allowed to dry.
Answered by: Bostik Product Support
Date published: 2017-02-09

Can I tile straight onto a chipbord floor

Asked by: mercedesastonmartin
Thank you for your recent enquiry. We do not recommend tiling directly on to chipboard due to it's flexibility. It is best practice to over lay the floor with a minimum of 18mm ply screwed down at 300mm centres. This way the floor will not 'flex' when under load. If the floor structure does move then your tiles are prone to cracking. I hope this information helps.
Answered by: Bostik Product Support
Date published: 2017-03-12

can this product be used directly over a synthapruf DPM

Asked by: admasl
Thank you for your recent enquiry relating to our product. I believe the Synthapruf is a bitumen based product and therefore none of our tile adhesives can be used directly over it. You may want to contact the manufacturer of the Synthapruf but it is of my understanding that for the product to perform as an effective DPM it will need a 50mm screed applied over the top before tiling can be completed. None of our adhesives can be applied over a bitumen surface. I apologise I am unable to offer you a solution on this occasion.
Answered by: Bostik Product Support
Date published: 2016-12-04

is this product heat resistant, as I want to stand a multi fuel stove on them

Asked by: MickleMouse
The Evo-Stik Fast Set Floor Tile Adhesive ( in common with other tile adhesives in the Evo-Stik tile adhesive range ) will have a temperature resistance of up to 70°C. You may have to check with the manufacturer of the stove as to what heat the stove will give off and they may have specific recommendations for surfaces that their stove should be stood on and where it should be situated.
Answered by: Bostik Product Support
Date published: 2016-04-09
  • y_2017, m_3, d_24, h_16CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_GB, sid_24881, prod, sort_[SortEntry(order=LOCALE, direction=DESCENDING), SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_screwfix
Specification
Brand Evo-Stik
Colour Off-White
Coverage Per Pack 2 m²
Manufacturer Guarantee 1 Year Guarantee
Pack Size 1
Pieces in Pack/Case 1
Product Type Fast Set Floor Tile Adhesive
Resistant Type Water-Resistant
Sealant Adhesive Volume 5 Ltr
Suitable Application Suitable for Interior Concrete & Wooden Floors
Total Product Weight 7.09 kg

Downloads

Safety Data Sheet (COSHH)