Rated 5 out of 5Â by BobDiggerBuckets Excavator buckets
Bought these to try out as others I had tried weren't up to much. I am very impressed with these discs. I refurbish excavator digging buckets for construction company's, and need to cut through tough thick steel. I used them on preformed Hardox bucket cutting edge steel section, Hardox is a hardened steel purposely made for hard wearing applications, I used these discs to cut through 200mm x 20mm Hardox to cut off a section to length. I found each disc would cut through this section up to 4 times per disc, and each cut took between 3 to 4 minutes. So at about Â£0.60p per cut commercially for me they are very productive both in economy and speed. I will definitely buy these again and again. Am, going to try another manufacturer to see how they perform relative to these. Will let you know.
25 Jan 2016
Rated 4 out of 5Â by Acornis Good value
Have used Erbauer blades before so knew the product was reliable and safe.
21 Jan 2016
Rated 5 out of 5Â by PAD1 Excellent value from Screwfix
I bought three packs of 5 and used 10 of the discs to cut up a 2,730 litre (600 gallons) steel tank 4mm thick into pieces that two people could just about carry together.
Although only 2mm thick I felt confident using the Erbauer cutting discs and none of them shattered. They did wear down a bit quicker than I thought they should and I would estimate that 2 metres of steel 4mm thick is about the limit of each disc. However, there is still enough left to be able to use it on my 115mm angle grinder.
I used a 110V reciprocating saw to cut off the front end of the tank as this didn't cause any sparks and once inside the tank I could clean out all the residue kerosene and muck and then I could work inside with the Erbauer cutting discs quite safely. You can see the job on You Tube if you search on Erbauermetalcutting. The crash at the end of one of the videos is the back end of the tank falling off and onto the wall. I was working in a very confined space in a vault under a pavement.
9 Sep 2015
Rated 5 out of 5Â by JamesB13 Good value
Great for cutting rebar and sheet steel. Don't last very long but they are cheap
11 Aug 2015