Erbauer 3 Diamond Core Kit
Good on the (w)hole
Bought this set a few weeks ago as I needed to make a few neat holes. Have used all 3 core bits several times and each time have achieved the desired holes with the minimum of effort. The cutters work well on a variety of materials (concrete, engineering brick, regular brick) and apart from removing the blue paint there is no apparent degradation of the core bits. I had a couple of holes to cut in a patio and found that I had to clear the bit frequently as the material was wet and the bit tended to clog and seize up - no such problems on dry material or vertical walls. Very good value and a nice convenient storage case as well. PLEASE NOTE - make sure you do NOT set your drill to hammer as you will destroy the core bit.
28 May 2015
Does what it say
My old diamond cores where w little worn out so I tried this set on a bathroom conversion we are completing this week for a soil pipe and a 40mm waste pipe. It was effortless with my Makita avt drill. Only issue is disconnecting the extension from the SDS bar.
21 May 2015
Good value product. Would recommend this product for its value for money compared to others.
11 May 2015
Like a knife through butter
Bought this kit for the 52mm bit and was sceptical due to price of this kit compared to "better brands"
Worked an absolute treat and job done smooth and swiftly.
Definitely recommend as a handy bit of kit and the case is solid too.
5 May 2015